1. Overview
1.1 Front Panel
No. Name
1
LED Indicator
2
IR Receiver
3
USB2.0 Port
1.2 Rear Panel
No Name
1
Audio Input
Loop Video
2
Output 1~16
3
Audio Output
4
VGA Port
1
Description
Power: When power is on, the LED will continue lighting in green.
HDD: When power is on, the LED will continue lighting in red. When HDD
is reading/writing data, the LED will flashes red.
Receiver for signals from the IR remote control.
USB2.0 port for connecting to a mouse or an external storage device.
1
Description
Connects to audio input devices, such as microphones. Note that the
microphones with a (built-in) amplifier and external power supply are
required.
You can also optionally connect the monitors to each Loop Video Output
to display the video of the corresponding channel.
Connects to an audio output device, such as speakers. Note that the
speakers with a (built-in) amplifier and external power supply are
required.
Connects to a monitor using a VGA cable.
2
7
1
2
3
3
4
5
6
8
9
10 11 12