The Kantech
IP Link makes it easy and affordable to
™
manage your Kantech access control system over a
network.
Unlike similar devices, the IP Link manages polling
of door controllers and communicates with the
EntraPass Gateway only when an event has occurred.
Communication integrity is ensured through a heartbeat
signal, which is sent at a regular interval to the EntraPass
software. This asynchronous communication significantly
reduces the amount of bandwidth required to manage
your access control system over the network.
The IP Link is easy to set up. Use an EntraPass
workstation, a web browser or the KT-Finder, an
intuitive standalone application designed to locate
and configure the IP Link.
Kantech
IP Link
™
Features That Make a Difference:
Powerful solution for connecting KT-100, KT-200 and
KT-300 door controllers to existing network infrastructure
S ecure communication via 128-bit AES encryption
C onfigured using either a static or dynamic IP address
U p to 512 IP Links can be supported per EntraPass
Gateway, a cost-effective solution to managing multiple
remote sites
C ommunicates over the network only as required, keeping
network traffic down to a minimum
P lug and play setup makes it quick and easy to use with
EntraPass access control software
S upports up to 32 door controllers per device
C ompatible with EntraPass Special, Corporate and Global
Editions (Global Edition with Corporate Gateway only)
In most installations, EntraPass software
automatically detects and configures the IP Link
using the MAC address.
The IP Link uses 128-bit AES encryption to
communicate with EntraPass, which ensures secure
communication when used over the Internet.
The IP Link leverages Kantech's robust portfolio of
KT-controllers to offer a powerful security solution for
any size application. The EntraPass access control
system can control access for one door to thousands
of doors and, with the IP Link, can effortlessly
communicate over an existing network.
D A T A s h e e T