Sensor Board - HP Chromebook 14 G6 Maintenance And Service Manual

Sensor board

Table 5-7 Sensor board spare part information
Description
RTC battery (includes cable and double-sided adhesive)
Before removing the sensor board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
6. Remove the speakers (see
Remove the sensor board:
1. Release the ZIF connector (1) to which the sensor board cable is connected, and then disconnect the sensor
board cable from the sensor board.
2. Remove the sensor board (2) and cable.
Reverse this procedure to install the sensor board.
Keyboard/top cover on page
Speakers on page 32).
20).
Battery on page 26).
Component replacement procedures
Spare part number
L90433-001
33