Sensor Board Cable - HP Chromebook 14 G6 Maintenance And Service Manual

Sensor board cable

NOTE: The sensor board cable is included in the Cable Kit, spare part number L90412-001.
Before removing the sensor board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
Remove the sensor board cable:
1. Release the ZIF connector (1) to which the sensor board cable is connected, and then disconnect the sensor
board cable from the system board.
2. Release the ZIF connector (2) to which the sensor board cable is connected, and then disconnect the sensor
board cable from the sensor board.
3. Remove the sensor board cable (3).
Reverse this procedure to install the sensor board cable.
Keyboard/top cover on page
Battery on page
20).
26).
Component replacement procedures 31