Download Print this page

Installation; Led Light System; In The Event Of Non-Use Of The Applicance; In The Event Of An Interruption To The Power Supply - KitchenAid KCBPX 18120 Instructions For Use Manual

Hide thumbs

Advertisement

1. INSTALLING TWO APPLIANCES

Installation

During installing the freezer
INSTALLATION
To guarantee adequate ventilation, leave a space
together ensure that the freezer is located on the left and
the fridge on the right (as shown on the drawing). Left side
on both sides and above the appliance.
of refrigerator is equipped with special device in order to
The distance between the rear of the appliance
avoid condensation problems between appliances.
and the wall behind the appliance should be at
To guarantee adequate ventilation, leave a space on
least 50mm.
both sides and above the appliance.
A reduction of this space will increase the Energy
consumption of product.
The distance between the rear of the appliance and the
wall behind the appliance should be at least 50mm.
A reduction of this space will increase the Energy
consumption of product.
INSTALLING TWO APPLIANCES
During installing the freezer 1 and the fridge 2
together ensure that the freezer is located on the
INSTALLING TWO APPLIANCES
We recommended installing two appliances together
left and the fridge on the right (as shown on the
drawing).
using the linking-kit
During installing the freezer 1 and the fridge 2
You can buy it in Service.
together ensure that the freezer is located on the left
Left side of refrigerator is equipped with special
and the fridge on the right (as shown on the drawing).
device in order to avoid condensation problems
Left side of refrigerator is equipped with special device
between appliances.
in order to avoid condensation problems between
appliances.
We recommended installing two appliances
We recommended installing two appliances together
together using the linking‑kit 3 (as shown on the
using the linking-kit 3 (as shown on the drawing).
drawing).
2. FUNCTIONS
2.1. SMART DISPLAY

Led light system

This function can be used to save energy.
Please follow the instructions contained in the Quick
Start Guide to activate/deactivate the function.
The light system inside the fridge compartment
Two seconds after activation of the Smart Display, the
uses LEDs light, allowing a better lightning as well
display goes off. To adjust the temperature or use other
functions, it is necessary to activate the display by
as very low energy consumption.
pressing any button. After about 15 seconds without
If the LED light system does not work, please
performing any action, the display goes off again.
When function is deactivated the normal display is
contact the Service to replace it.
restored. The Smart Display is automatically disabled
after a power failure. Remember that this function does
not disconnect the appliance from the power supply,
but only reduce the energy consumed by external
display.

In the event of non-use of the applicance

Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
This function is available only on the model with User
Disconnect the appliance from the power supply,
Interface on the door.
empty it, defrost it (if necessary) and clean it.
Keep the doors slightly ajar to let air circulate

In the event of an interruption to the power supply

*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.
Keep the doors closed so the food stays cold for
as long as possible. Do not re‑freeze food that has
partially defrosted. If there is a prolonged power
and the fridge
1. INSTALLING TWO APPLIANCES
During installing the freezer
and the fridge
together ensure that the freezer is located on the left and
the fridge on the right (as shown on the drawing). Left side
of refrigerator is equipped with special device in order to
avoid condensation problems between appliances.
(as shown on the drawing).
We recommended installing two appliances together
using the linking-kit
(as shown on the drawing).
You can buy it in Service.
*
2. FUNCTIONS
*
2.1. SMART DISPLAY
This function can be used to save energy.
Please follow the instructions contained in the Quick
Start Guide to activate/deactivate the function.
Two seconds after activation of the Smart Display, the
display goes off. To adjust the temperature or use other
functions, it is necessary to activate the display by
pressing any button. After about 15 seconds without
performing any action, the display goes off again.
When function is deactivated the normal display is
restored. The Smart Display is automatically disabled
after a power failure. Remember that this function does
not disconnect the appliance from the power supply,
but only reduce the energy consumed by external
display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
This function is available only on the model with User
Interface on the door.
*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.
9
50mm
50mm
2.2. 6th SENSE
GREEN INTELLIGENCE
2.2. 6th SENSE
The 6th Sense/ Green Intelligence function works to
GREEN INTELLIGENCE
maintain the right temperature in the following cases:
The 6th Sense/ Green Intelligence function works to
- Door opened for a while
maintain the right temperature in the following cases:
The function activates when door opening causes the
- Door opened for a while
The function activates when door opening causes the
internal temperature to increase to values that do not
internal temperature to increase to values that do not
ensure safe storage of food and remains active until
ensure safe storage of food and remains active until
optimal storage conditions have been restored.
optimal storage conditions have been restored.
- Fresh food stored in the freezer
- Fresh food stored in the freezer
The function activates when fresh food is placed in the
The function activates when fresh food is placed in the
freezer and remains active until optimal freezing
conditions are reached so as to ensure the best
freezer and remains active until optimal freezing
freezing quality with the lowest power consumption.
conditions are reached so as to ensure the best
Note: Besides the quantity of food loaded into the
freezing quality with the lowest power consumption.
freezer, ambient temperature and the quantity of food
already inside the freezer affect the duration of the 6th
Note: Besides the quantity of food loaded into the
Sense/
Green
significant duration variations are quite normal.
freezer, ambient temperature and the quantity of food
already inside the freezer affect the duration of the 6th
inside the compartments. By doing this, you avoid
Sense/
Green
the development of mould and bad odours.
significant duration variations are quite normal.
cut, the black out alarm may also activate (in
products with electronics).
/
/
Intelligence
function.
Therefore
Intelligence
function.
4
Therefore
4

Advertisement

loading

  Related Manuals for KitchenAid KCBPX 18120

This manual is also suitable for:

Kcfpx 18120