Electrical connection for Great Britain and Ireland only
Warning - this appliance must be earthed
If the mains lead of this appliance is fitted with a
BS 1363A 13amp fused plug, to change a fuse in
this type of plug use an A.S.T.A. approved fuse to
BS 1362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refit both into plug.
The fuse cover must be refitted when changing a
fuse and if the fuse cover is lost the plug must not
be used until a correct replacement is fitted.
Correct replacement are identified by the colour
insert or the colour embossed in words on the
base of the plug.
Replacement fuse covers are available from your
local electrical store.
For the Republic of Ireland only
The information given in respect of Great Britain
will frequently apply, but a third type of plug and
socket is also used, the 2‑pin, side earth type.
Using for the first time
Connect the appliance to the power supply.
In models with electronics, a sound signal may be
emitted, which means that the temperature alarm
has been activated: press the sound alarm off
button. Where provided, position the antibacterial
anti‑odour filter in the fan as demonstrated in the
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket
outlet, please contact After‑sales Service for
further instruction. Please do not attempt to
change plug yourself. This procedure needs to be
carried out by a qualified technician in compliance
with the manufactures instructions and current
standard safety regulations.
Note: After turning the appliance on, you
must wait for 6 hours for the correct storage
temperature to be reached for a normally filled