TurboChef FSB10036 Field Service Bulletin

C-series ovens

REFERENCE:

TurboChef C-Series ovens operational issue

All field support personal

C3/C, C3/AB, C3-Multi

Incorrect (backward) installation of cooking platter causing door open and operational issues.

During a service call, start-up or scheduled maintenance to an oven:

1. Prepare oven top trim surface next to top left sticker "Exposure to Microwaves" by

cleaning and removing grease residue using Oven Cleaner.

2. Once you have cleaned the surface, peel back of new sticker and place next to existing

sticker with a minimum of ¼" clearance. See Figure 1 for overview and figure 2 for

details.

FSB10036

SEPT 02

Page 1 of 2

Table of Contents

Do you have a question about the FSB10036 and is the answer not in the manual?

Page 1 2. Once you have cleaned the surface, peel back of new sticker and place next to existing sticker with a minimum of ¼” clearance. See Figure 1 for overview and figure 2 for details. FSB10036 SEPT 02 Page 1 of 2...
Page 2 FSB10036 SEPT 02 END OF PROCEDURE Page 2 of 2...

C3/c C3/ab C3-multi