When the user interface has not been used for fi ve minutes (no heart-rate registered, no keys pressed, no pedalling), it automatically switches itself to energy-saver state. Alpha 150 is returned to its active state by pressing any key, starting to pedal or sending heart-rate signals to the unit.
Tunturi dealer or importer as an accessory. Measure your pulse as follows: Open the cover at the back of Alpha 150 and pushing the ear sensor connector into the interface connector. Lead the ear sensor wire out through the hole between the cover and the box, and close the cover.
4. MAIN DISPLAY :: When you turn the user interface on, the display shows the following exercise parameters: Effi ciency (W) Figure indicates exercise effi ciency in Watts, which depends on pedalling speed and resistance adjustment. Energy consumption (kcal / kJ) Displays cumulative energy consumption (0-999);...
Page 5
5.4 PROG PROG includes pre-programmed exercise profi les, memory positions for self-designed profi les and measuring recovery pulse. The resistance level varies in a pre-determined way and has three options: Health = fi tness improvement, Slim = weight control, Fit = profi le designed for the physically fi...
Changes or modifi cations not expressly approved by Tunturi Oy Ltd will void the user's authority to operate the equipment! Due to our continuous policy of product development, Tunturi reserves the right to change specifi...
Page 7
PROFILES :: Health Slim Health (min) (W) (bps) (min) Level Intensity = 0,775 0,85 0,925 Level x 42 :: Slim 1,075 1,15 1,225 :: 43...