Advertisement
Available languages
Available languages
to use your blender
1 Put your ingredients into the goblet.
2 Fit the filler cap to the lid and turn in
a clockwise direction to lock
3 Fit the lid to the goblet by pushing
down until secure.
4 Place the blender onto the power
unit
.
5
The appliance will not work
l
if the blender is incorrectly
fitted.
5 Plug in and the indicator light
will remain unlit whilst in the 'OFF'
position or the goblet is not fitted.
6 Choose one of the following options
and refer to the recommended
usage chart:
Programme buttons - Push the
l
ON/OFF lever
position and the Power On indicator
light
and all 3 programme
6
buttons will light up. Press the
required programme button and
the lights on the other buttons
will go out and the programme
will start. The blender will switch
off automatically at the end of the
programme time. If you wish to
stop before the programme time
has elapsed, press the selected
programme button again.
Manually select a speed by turning
l
the speed control
required speed is reached. At the
end of blending return the speed
control to "O" before removing the
blender.
(P) Pulse – operates the motor in
l
a start/stop action. The pulse will
operate for as long as the lever is
held down.
Do not remove the goblet
l
until the blades have stopped
rotating and the speed control
is in the 'O' position.
Note: If the blender is removed from
the power unit whilst a speed is
selected the Indicator light will go out
and the motor will stop. When the
blender is replaced onto the power
unit the Power On light will flash. The
speed control will need to be turned
to the 'O' position before blending
can be resumed.
1
6
9
down to the 'On'
until the
8
Refer to the troubleshooting
l
section if you experience any
problems with the operation
of the blender.
.
to use the stir stick
1 Fit the lid to the goblet and remove
the filler cap. DO NOT use the stir
stick in the goblet without the lid
fitted.
2 Insert the stir stick
round the goblet slowly whilst the
motor is operating
3 Use the stir stick to help move
ingredients around the goblet and
prevent clogging during processing.
hints
To blend dry ingredients - cut into
l
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep your
hand over the opening. For best
results empty regularly.
The processing of spices is not
l
recommended as they may damage
the plastic parts.
For best results do not process for
l
longer than 60 seconds. Operating
the blender for longer may cause
the temperature of the ingredients to
increase.
When making mayonnaise, put all
l
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole in
the lid.
Thick mixtures, e.g. nut butters and
l
dips, may need scraping down. If the
mixture is difficult to process, add
more liquid and use the stir stick.
14
and move it
bq
2
.
Advertisement
