Keysight E4990A Troubleshooting Manual page 30

NOT E
Impedance Analyzer
Step 3.
Windows boot screen.
The Windows boot screen is displayed as shown in
Windows boot screen is displayed, it is assumed that the SSD
works and the Windows operating system is starting up
Figure 9 Windows boot screens
If you encounter the following problems, try to execute the system
recovery before replacing the SSD.
• "xxx file is missing" message is displayed on DOS screen.
• The window boot screen is not displayed after the splash
screen.
• Windows always boots up in Safe Mode.
If the E4990A was turned off without proper shutdown process, Microsoft
Scandisk runs while the windows boot screens are displayed. If a serious
problem is found during the scan, execute the system recovery. For
details on executing the system recovery, refer to the Installation Guide. If
the operating system still does not boot up properly after reinstallation,
replace the SSD.
1
Troubleshooting
Figure 9
. If the
29