Download Print this page
Argos 618/0144 Assembly Instructions Manual
Argos 618/0144 Assembly Instructions Manual

Argos 618/0144 Assembly Instructions Manual

Small corner desk with hutch

Advertisement

Quick Links

Components
A 1 x Shelf
B 1 x Table Top
C
1 x Right Side Panel
D
1 x Left Side Panel
Fittings
A
21 x Screw
B
4 x Locking Pin
F
4 x Locking Nuts
G
1 x Screw
E
1 x Bottom Panel
F
1 x Keyboard Drawer
G
1 x Support
H
1 x Bottom Support
I
1 x Back Panel
J
1 x Back Support
K 2 x Track
L
3 x Tube
C
10 x Screw
D
6 x Dowel
1 x Wall Plug
1 x Wall Strap
H
I
Small Corner Desk With Hutch
Simple Assembly Instructions
IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
E
1 x Screw
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
-
Please keep for future reference
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 618/0144 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Argos 618/0144

  • Page 1 Components Small Corner Desk With Hutch A 1 x Shelf 1 x Bottom Panel Simple Assembly Instructions Please keep for future reference B 1 x Table Top 1 x Keyboard Drawer 1 x Support 1 x Bottom Support 1 x Right Side Panel 1 x Back Panel 1 x Back Support 1 x Left Side Panel...
  • Page 2 Assembly Instructions Assembly Instructions Stage 1 – Stage 2 – Fitting the Tracks Fitting the Side Panels Check Before Assembly NOTE: It would be useful to ask fig. 3 someone to help you at this stage. There are many different kinds of Screws and Panels.
  • Page 3 Assembly Instructions Assembly Instructions Stage 3 – Stage 4 – Fitting the Table Top Fitting the Shelf NOTE: It would be useful to ask NOTE: It would be useful to ask someone to help you at this someone to help you at this stage.
  • Page 4 Assembly Instructions Assembly Instructions Stage 5 – Stage 6 – Fitting the Shelf Finishing the Unit IMPORTANT: When drilling into NOTE: It would be useful to ask walls always check that there someone to help you at this are no hidden wires or pipes etc. stage.
  • Page 5 A Guide to A Guide to Wall Mounting & Fixings Wall Mounting & Fixings IMPORTANT: No.3 "Shield Anchor" Wall Plug No.5 "Cavity Fixing - Heavy Duty" When drilling into walls always check Heavy Loads Wall Plug that there are no hidden wires or pipes etc.
  • Page 6 Small Corner Desk With Hutch Assembly Instructions - Please keep for future reference 618/0144 Dimensions Width - 81cm Depth - 56cm Height - 92cm Important - Please read these instruction fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800...
  • Page 7 Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand on the product, this could cause damage. components and tools listed on recommend the pages 2 and 3. use of power drill/drivers for inserting screws, plastic bags and separate them as this could damage the unit.
  • Page 8 Components - Panels Please check you have all the panels listed below Base Panel x 1 Left Side Panel x 1 Bottom Panel x 2 (50x 40cm) (74 x26cm) (50 x10 cm) Desk Back Panel x 1 Desk Top Panel Right Side Panel x 1 (74x 12cm) (57.5x 57.5cm)
  • Page 9 Left side runner x 1 Cam X 6 12mm Screw X 8 Right side runner x 1 38mm Screw x 14 Plastic dowel x 14 37mm Cam pillar X 6 32mm Screw x 3 35mm Cross head screw x 3 Plastic cover x 12 Tools required Screwdriver...
  • Page 10 Assembly Instructions Step 1 Attaching cam Attach 2 pcs of cam onto panel The arrow on cams should be pointed towards to the pre- drilled holes of panel as shown. Please ensure the cams are fixed correctly as shown. Finished Edge Step 2 Attaching runner Please make sure 1...
  • Page 11 Assembly Instructions Assembly Instructions Step 3 Attaching dowels Insert 6 pcs of dowels into panel as shown . Step 4 Attaching bottom Unfinished Surface panel Unfinished Edge Two people are required for assembly. Use 2 pcs of screws to fix panel and panel as shown .
  • Page 12 Assembly Instructions Step 6 Attaching bottom panel Two people are required for assembly. Use 2 pcs of screws to fix panel to the unit as shown . Warning: Unfinished Surface Second person needs to hold both panels & panel while the other person fixing the screws on panel...
  • Page 13 Assembly Instructions Step 8-continued Please make sure 1 pc of the right hand side runner is selected correctly. Use 1 pc of screw fix runner onto panel Unfinished Edge Step 9 Attaching dowel Insert 6 pcs of dowels into panel as shown.
  • Page 14 Assembly Instructions Step 11 Attaching dowel Insert 2 pcs of dowels into panel and turn the unit as shown. Unfinished Surface Step 12 Attaching back panel Use 2 pcs of screws to fix panel to the unit as shown . Unfinished Surface...
  • Page 15 Assembly Instructions Step 13 Attaching cam Attach 2 pcs of cam onto panel . The arrow on cams should be pointed towards to the pre-drilled holes of panel as shown. Please ensure the cams are fixed correctly as shown. Unfinished Surface Step 14 Attaching cam pillar...
  • Page 16 Assembly Instructions Step 15 Attaching top panel Two people are required for assembly. Please note the red arrow of each cam is towards to the correct direction. Attach panel onto the unit as shown. Turn the cams clockwise to fix the panel.
  • Page 17 Assembly Instructions Step 16 Attaching screw Finger tighten the 3pcs of threads Unfinished Surface onto the panel Step 17 Attaching monitor stand Finger tighten the 3pcs of sections through Unfinished threads onto the Surface panel Step 18 Attaching monitor stand Use 3 pcs of cross head bolt to fix sections...
  • Page 18 Assembly Instructions Step 19 Attaching keyboard Two people are required here. Use 4 pcs of screws to fix the panel onto the runners Finished Edge Step 20 Locking Cam Turn the cams clockwise to fix 0° 90° 120° 180° the unit. TURN Caution: 180°...
  • Page 19 Assembly Instructions Step 21 Attaching covers Insert 6 pcs of plastic covers to the unit to hide the screw heads on the unit. Step 22 Attaching covers Insert 6 pcs of plastic covers to the unit to hide the screw heads on the unit.
  • Page 20 Assembly Instructions Step 25 Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800...
  • Page 21 Small Corner Desk With Hutch Assembly Instructions - 618/0144 Please keep for future reference Dimensions Width - 81cm Depth - 56cm Height - 92cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800...
  • Page 22 Safety and Care Advice Important - Please read these instructions fully before starting assembly Check you have all the Do not stand on the panels, this We do not components and tools listed on could cause damage. recommend the use pages 2 and 3.
  • Page 23 Components - Panels If you have damaged or missing components, call the Customer Helpline:08456 400800 Please check you have all the panels listed below Left side Bottom x 2 Base (74 x 26cm) (50 x 10cm) (50 x 40cm) Right side Desk back Desk top panel (74 x 26cm)
  • Page 24 Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. Left side runner x 1 Locking nut x 6 12mm Screw x 8 Wood dowel x 14...
  • Page 25 Assembly Instructions Step 1 Step 1 Attaching cam Attach 2 pcs of cam onto panel Please ensure the cams c are correctly as shown. Finished Edge Step 2 Attaching runner Please make sure 1 pc of the left side runner is selected correctly.
  • Page 26 Assembly Instructions Step 3 Attaching dowels Insert Dowels into panel Step 4 Note: It would be useful to ask someone to help you at this stage. Unfinished Surface Unfinished Edge Use Screws to fix panel and panel as shown. Step 5 Attaching base panel Note: It would be useful to ask someone to help you...
  • Page 27 Assembly Instructions Step 6 Attaching bottom panel Note: It would be useful to ask someone to help you at this stage. Use Screws to fix panel to the unit as shown. Warning: Unfinished Second person Surface needs to hold both panels &...
  • Page 28 Assembly Instructions Step 8 - continued Use screw to fix runner onto panel Finished Edge Step 9 Attaching dowel Insert dowels onto panel as shown. Step 10 Attaching side panel Note: It would be useful to ask someone to help you at this stage.
  • Page 29 Assembly Instructions Step 11 Attaching dowel Insert dowels onto panel Unfinished Surface Step 12 Attaching back panel Use Screws to fix panel to the unit as shown. Unfinished Surface...
  • Page 30 Assembly Instructions Step 13 Attaching cam Attach cams onto panel Please ensure the cams c are correctly as shown. Unfinished Surface Step 14 Attaching cam pillar Fix cam pillars onto panel as shown. Unfinished Surface...
  • Page 31 Assembly Instructions Step 15 Attaching top panel Note: It would be useful to ask someone to help you at this stage. Attach panel onto the unit as shown. Turn the cams clockwise to fix the panel 0° 90° 120° 180° as shown.
  • Page 32 Assembly Instructions Step 16 Attaching screw Finger tighten screws onto the panel Unfinished Surface Step 17 Attaching metal tube Unfinished Surface Finger tighten metal tubes through screw onto the panel Step 18 Attaching monitor stand 0 1 D Use Screws to fix top monitor panel to the...
  • Page 33 Assembly Instructions Step 19 0° 90° 120° 180° Locking cam Turn the cams clockwise to fix the unit. ° TURN 80 Caution: Turn 180 Degree clockwise to fasten the cams. Step 20 Attaching keyboard Note: It would be useful to ask someone to help you at this stage.
  • Page 34 Assembly Instructions Step 21 Attaching covers Insert plastic covers the unit to hide the screw heads on the unit. Step 22 Attaching covers Insert plastic covers the unit to hide the screw heads on the unit.
  • Page 35 Assembly Instructions Step 23 Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline : 08456 400800...