Advertisement
Quick Links
Security Printing Solutions
READ ME FIRST
Introduction
Your TROY Security Printing Solution offers value-added functionality and the flexibility to integrate smoothly
with your check-printing system. Use the TROY Security Printing Solutions CD to install the necessary
Hewlett-Packard LaserJet printer drivers and TROY support files. To ensure successful software installation,
perform the following steps in sequential order. The documentation and installation files contained on the
TROY Security Printing Solutions CD will be needed in the event that your TROY Security Printing Solution is
reinstalled in a new location or after service has been performed. In order to best install and setup your new
TROY product, use this Quick-Start Guide and the Hewlett-Packard Getting Started Guide.
Package Contents
•
TROY Security Printing Solutions CD
•
TROY Security Printing Solutions Information Sheet
•
TROY Software License Agreement
•
TROY MICR Document Template
•
TROY Security Printing Solutions User's Guide (provided in PDF format on the CD)
•
TROY MICR Basics Handbook (provided in PDF format on the CD)
•
TROY Security Printing Solutions Quick-Start Guide (this document)
IMPORTANT: If you purchased a TROY Font Memory Card Kit, please refer to the TROY Font Card
Installation Guide provided with the TROY product to install the font card into your
Hewlett-Packard LaserJet printer before proceeding with these setup instructions. After
the font card has been installed in your printer, proceed to Step 2 in this document to install
the required TROY support files. In addition, a MICR toner cartridge must also be installed
in your HP printer to print MICR documents using the TROY Font Card Solution.
STEP 1:
Unpack / Setup the TROY Security Printing Solutions Printer
1. Follow ONLY the unpacking and setup procedures described in the Hewlett-Packard Getting Started
Guide (supplied in this startup package for TROY Security Printing Solutions printers only), and then
proceed to step #2 to install the appropriate PCL 5e printer driver provided on the TROY Security
Printing Solutions CD. Do NOT use the Hewlett-Packard CD to install the printer software for this
installation process.
2. Be sure to install the TROY MICR toner cartridge (supplied with TROY Security Printing Solutions
printers only) in the same manner as described for the standard toner cartridge. The TROY MICR toner
cartridge must be installed in your TROY printer or Hewlett-Packard printer to print MICR documents.
Document #50-70430-001 Rev. B
Product Installation Instructions
(For use with TROY MICR / IRD 3005 Security Printing Solutions)
Quick-Start Guide
Page 1 of 11
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TROY Group TROY IRD 3005
Summary of Contents for TROY Group TROY IRD 3005
-
Page 1: Read Me First
Security Printing Solutions READ ME FIRST Product Installation Instructions (For use with TROY MICR / IRD 3005 Security Printing Solutions) Introduction Your TROY Security Printing Solution offers value-added functionality and the flexibility to integrate smoothly with your check-printing system. Use the TROY Security Printing Solutions CD to install the necessary Hewlett-Packard LaserJet printer drivers and TROY support files. - Page 2 Security Printing Solutions STEP 2: Install the HP PCL 5e Printer Driver for Microsoft IMPORTANT: Use only the TROY Security Printing Solutions CD to install the Hewlett-Packard PCL 5e printer driver designated for your Hewlett-Packard or TROY printer. Some of the steps listed below and/or software screens may differ slightly in appearance depending on your operating system.
- Page 3 Security Printing Solutions 15. Click on Finish to complete the installation. The printer driver installation will proceed automatically and add the printer icon to the printer folder. STEP 3: Install the TROY Support Files for Microsoft NOTE: The Hewlett-Packard PCL 5e printer driver must be installed on the host computer prior to loading the TROY support files (refer to STEP 2 on the previous page).
- Page 4 Security Printing Solutions 13. Close all remaining open windows. Please refer to the TROY Security Printing Solutions User’s Guide, Section 7 – Using TROY Fonts before using the installed fonts. Install the TROY Screen Fonts for Windows In addition to the TROY printer fonts that are permanently programmed into your TROY Security Printing Solution, the TROY screen fonts have been developed for display use only as a visual reference and for making positional adjustments to the MICR line.
- Page 5 Security Printing Solutions Install the TROY Metrics File for Windows 1. Close all applications before installing the TROY Font support files. 2. Insert the TROY Security Printing Solutions CD into your computer CD-ROM drive. 3. From the Microsoft Windows Start menu, click on Settings, and then click on Printers. 4.
- Page 6 Security Printing Solutions STEP 4: Install the TROY Software for Microsoft Install the TROY Printer Utility for Windows The TROY Printer Utility provides useful functions for testing and managing your TROY Security Printing ® Solution through Microsoft collection, allowing access to any printer installed in the Windows environment. The printer connection may be local, network, or direct network connected.
- Page 7 Security Printing Solutions Create a TROY Port Monitor Port on Your Host Computer for Windows 1. From the Start menu, click on Settings, Printers, right-click on the desired printer, and then left-click on Properties. 2. Select the Ports tab, and then click on the Add Port button. 3.
- Page 8 Security Printing Solutions STEP 5: Test the TROY Font Support for Microsoft To verify that the TROY Windows font support files were properly installed on your system, demonstration documents are provided through the TROY Printer Utility in Windows that can be printed out to visually identify all security and/or barcode fonts downloaded to the TROY printer.
- Page 9 Quick-Start Guide Security Printing Solutions for the specific escape sequence (displayed above each character map) used to call each of the TROY fonts. TROY Security Font Demonstration Page (not to scale) Page 9 of 11 Document #50-70430-001 Rev. B...
- Page 10 Security Printing Solutions STEP 6 : Check the MICR Print Quality Maintaining high-quality MICR printing is vital to error-free reader/sorter processing of your checks at the bank. TROY’s Security Printing Solutions have been consistently shown to have the lowest bank reject rates in the industry.
-
Page 11: Obtaining Technical Assistance
A 25% restocking fee will be applied to any non-defective items returned within 30 days. • No returns will be accepted after 30 days, unless otherwise stated. Return product to: TROY Group Inc 3 Bryan Drive Wheeling, WV 26003 Attn: (Your RGA Number) Reference Material •...
Need help?
Do you have a question about the TROY IRD 3005 and is the answer not in the manual?
Questions and answers