Husqvarna K1270 II Operator's Manual page 4

Product overview K1270 II Rail
1
2
29
30
1. Operator's manual
2. Decompression valve
3. Blade guard
4. Adjustment handle for blade guard
5. Cutting equipment decal
6. Front handle
7. Information and warning decal
8. Air filter cover
9. Start instruction decal
10. Choke control
11. Throttle lockout
12. Throttle trigger
13. Air purge bulb
14. Stop switch
15. Air intake
16. Starter rope handle
17. Starter housing
18. Type plate
19. Bushing and decal
20. Combination wrench
21. Flange, spindle, arbor bushing
22. Cutting blade (not supplied)
23. Front belt guard
24. Cutting head
25. Belt tensioner
26. Installation point for rail fixture
27. Rear belt guard
28. Cutting arm
29. Fuel tank cap
4
4
3
23
24
25
26
31
28 27
20
5
21
22
34
33
32
18
19
17
30. Rear handle
31. Cutting guide
32. Rail fixture
33. Rail lock handle
34. Power cutter lock handle
Symbols on the product
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 8 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Kickbacks can be sudden, rapid
and violent and can cause life threatening
injuries. Read and understand the
6
7
16
14
15
12
13
Personal protective
988 - 002 -
8
9
10
11