Rear Panel - Yamaha A-S2200 Owner's Manual

Part Names and Functions

Rear panel

1
BAL (balanced) input jacks
Note
Set the ATTENUATOR selector and PHASE selector
appropriately for the playback component that is
connected to these jacks. (➔ page 20)
2
PRE OUT jacks
Note
• Audio signals output at the PRE OUT jacks are the same
channel signals that are output at the SPEAKERS L/R CH
terminals.
• The following parameter settings are effective for audio
signals output at the PRE OUT jacks.
- BASS
- TREBLE
- BALANCE
- VOLUME
10
7 8
1
9 0 A B
3
AUTO POWER STANDBY switch
ON: The unit enters standby mode automatically if it
is left turned on and not operated for eight hours
(Auto Power Standby function).
OFF: The unit does not enter standby mode
automatically.
4
TRIGGER IN jack
Connect external components that support the trigger
function. (➔ page 20)
5
REMOTE IN/OUT jacks
Connect external components that support the remote
function. (➔ page 21)
6
SERVICE jack
This jack is used to test the product.
7
SPEAKERS L/R CH terminals
8
TUNER input jacks
2
C D