Disassembly - LG Flatron EZ T910BU Service Manual

1. TILT/SWIVEL & BACK COVER REMOVAL
1) Set the monitor face downward.
2) Pull the latch (a), carefully remove the Tilt/Swivel by pulling it upward.
3) Remove two screws (b) .
4) Release the latch (c).
5) Slide the Back Cover away from the Front Cabinet of the monitor.
Tip Spec.
A(Width) : 5.0~13.0mm
B(Depth) : 0.6~0.9mm
C(Height) : 12.0mm
2. TOTAL CHASSIS ASSEMBLY REMOVAL
1) Set the monitor face downward.
2) Pressing the latch (a), Main Chassis
by pushing it upward.
Please be careful, not to cut pattern.

DISASSEMBLY

C
Tip
B
A
(c)
(a)
- 7 -
(b)
(b)
(a)
CDT
(a)