Download
Share
Print this page
Torque XCREATE-4CCLM Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Torque Manuals
  4. Fitness Equipment
  5. XCREATE-4CCLM
  6. Assembly instructions manual

Torque XCREATE-4CCLM Assembly Instructions Manual

4 ft (1.2 m) cable component module
Hide thumbs

Advertisement

Quick Links

Download this manual
ASSEMBLY INSTRUCTIONS
4 FT (1.2 M) CABLE COMPONENT LIGHT MODULE
4 FT (1.2 M) CABLE COMPONENT HEAVY MODULE
VERSION: XCREATE-4CCLM & 4CCHM
PART # 5675801-A

Advertisement

loading
Need help?

Need help?

Do you have a question about the XCREATE-4CCLM and is the answer not in the manual?

Questions and answers

Related Manuals for Torque XCREATE-4CCLM

Summary of Contents for Torque XCREATE-4CCLM

  • Page 1 ASSEMBLY INSTRUCTIONS 4 FT (1.2 M) CABLE COMPONENT LIGHT MODULE 4 FT (1.2 M) CABLE COMPONENT HEAVY MODULE VERSION: XCREATE-4CCLM & 4CCHM PART # 5675801-A...
  • Page 2 5667301 BUSHING, GUIDE ROD RETAINER If you worked with Torque X-Team Design during the purchasing process, 5644001 TUBE, SLIDE UPRIGHT please request a Bill of Material Drawing to reference your exact set-up.
  • Page 3 STEP 1 TOP BOOM SUPPORT 1/2 X 4-1/4" BOLT (8) 1/2" FLAT WASHER (16) 1/2" LOCK NUT (8) XCREATE UPRIGHT (2) (SEE NOTE) BASE SUPPORT NOTES: LOOSELY tighten bolt connections in this step. The XCREATE-CC is shown assembled to the XCREATE-7U. However, the XCREATE-CC can also be assembled to the XCREATE-8U and XCREATE-2S8U the same way.
  • Page 4 STEP 2 NOTE: DO NOT TIGHTEN THESE BOLTS AT THIS TIME NOTE: DO NOT TIGHTEN THESE BOLTS AT THIS TIME 1/2" LOCK NUT (2) BASE SUPPORT NOTE: IF ASSEMBLING CABLE STATIONS BACK TO BACK, PLEASE NOTE THAT THEY SHARE THE SAME BASE SUPPORT AND HARDWARE AS SHOWN.
  • Page 5 STEP 3a (LIGHT STACK) GUIDE ROD RETAINER (2) SHAFT COLLAR (2) GUIDE ROD (2) HEAD PLATE 10 LB WEIGHT PLATE (5) 15 LB WEIGHT PLATE (10) NOTE: WEIGHT STACK CUSHION (2) INSERT GUIDE RODS THROUGH THE WEIGHT STACK BASE AND TOUCH THE FLOOR WEIGHT STACK BASE NOTES: TOP BOOM SUPPORT has been hidden for illustration clarity.
  • Page 6 STEP 3b (HEAVY STACK) GUIDE ROD RETAINER (2) SHAFT COLLAR (2) GUIDE ROD (2) HEAD PLATE 20 LB WEIGHT PLATE (15) NOTE: WEIGHT STACK CUSHION (2) INSERT GUIDE RODS THROUGH THE WEIGHT STACK BASE AND TOUCH THE FLOOR WEIGHT STACK BASE NOTES: TOP BOOM SUPPORT has been hidden for illustration clarity.
  • Page 7 STEP 4 NOTE: PULL SPRING PIN OUT AND CAREFULLY SLIDE CARRIAGE OVER TUBE CARRIAGE SLIDE UPRIGHT TUBE...
  • Page 8 STEP 5 SLIDE UPRIGHT TUBE CARRIAGE STOP BUMPER 3/8 X 2-1/2" BOLT WEIGHT STACK BASE 3/8" LOCK NUT 3/8" FLAT WASHER NOTES: LOOSELY tighten bolt connections in this step.
  • Page 9 STEP 6 TOP BOOM TOP BOOM SUPPORT 1/2 X 4-1/4" BOLT (2) 1/2" FLAT WASHER (4) 1/2" LOCK NUT (2) NOTE: IF ASSEMBLING CABLE STATIONS BACK TO BACK, PLEASE NOTE THAT THEY SHARE THE SAME TOP BOOM SUPPORT AND HARDWARE AS SHOWN. BOTH TOP BOOMS NEED TO BE ASSEMBLED SIMULTANEOUSLY NOTES: LOOSELY tighten bolt connections in this step.
  • Page 10 STEP 7 NOTE: SECURELY TIGHTEN THESE BOLTS NOTE: SECURELY TIGHTEN THESE BOLTS TOP BOOM NOTE: SECURELY TIGHTEN THESE BOLTS 3/8" LOCK NUT NOTE: SECURELY TIGHT THIS BOLT SLIDE UPRIGHT TUBE 3/8" FLAT WASHER (2) 3/8 X 2-1/2" BOLT NOTE: SECURELY TIGHTEN THIS BOLT NOTES: SECURELY tighten all bolt connections made to this point.
  • Page 11 STEP 8 TOP BOOM GUIDE ROD RETAINER (2) NOTE 2: SHAFT COLLAR (2) SLIDE THE GUIDE ROD RETAINERS UP INSIDE THE TOP BOOM. SLIDE THE SHAFT COLLARS UP INSIDE OF THE GUIDE ROD RETAINERS AND SECURELY TIGHTEN THE SET SCREWS OF THE SHAFT COLLARS GUIDE ROD (2) NOTE 1: LIFT UP ON THE GUIDE RODS AND SECURELY...
  • Page 12 STEP 9 3/8" LOCK NUT 3/8" FLAT WASHER (2) 3/8 X 2" BOLT WEIGHT STACK BASE NOTE: 4-1/2" PULLEY MAKE SURE TAB OF PULLEY COVER IS PULLEY COVER VERTICAL AS SHOWN NOTES: SECURELY tighten bolt connections in this step.

  • Page 13: Left Side

    STEP 10a CABLE ROUTING 5) ROUTE CABLE UNDER THE CABLE RETAINING CLIP 3) ROUTE CABLE UNDER NOTE: TOP BOOM THE CABLE RETAINING CLIP MAKE SURE CABLE IS ROUTED THROUGH SLOT OF TOP BOOM CABLE CARRIAGE ROUTE CABLE IN DIRECTION OF ARROWS NOTE: BEFORE BEGINNING CABLE ASSEMBLY, 1) ROUTE CABLE OVER...

  • Page 14: Right Side

    STEP 10b CABLE ROUTING NOTE: TOP BOOM MAKE SURE CABLE 7) ROUTE CABLE UNDER IS ROUTED THROUGH THE CABLE RETAINING CLIP SLOT OF TOP BOOM ROUTE CABLE IN DIRECTION OF ARROWS CABLE 8) ROUTE CABLE UNDER THE TOP PULLEY CARRIAGE HEAD PLATE 6) ROUTE CABLE UNDER...
  • Page 15 STEP 11a HOUSING CABLE END GROMMET CORE M5 X 6MM SOCKET HEAD SCREW (2) NOTES: SECURELY tighten bolt connections in this step.
  • Page 16 STEP 11b HOUSING CABLE END GROMMET CORE M5 X 6MM SOCKET HEAD SCREW (2) NOTES: SECURELY tighten bolt connections in this step.
  • Page 17 STEP 11c NOTE 2: IF THERE IS A GAP BETWEEN THE HEAD PLATE AND FIRST PLATE, LOOSEN ONE OR BOTH OF THESE BOLTS AND ADJUST PULLEYS UP UNTIL HEAD PLATE TOUCHES THE FIRST PLATE. RETIGHTEN BOLT CONNECTIONS SECURELY. WEIGHT STACK PIN STORAGE NOTE 3: ATTACH WEIGHT STACK...
  • Page 18 STEP 12 3/8 X 3-3/4" BOLT (2) BASE SUPPORT 3/8" FLAT WASHER (4) 3/8" LOCK NUT (2) LEFT SHROUD BASE NOTES: SECURELY tighten bolt connections in this step.
  • Page 19 STEP 13 3/8 X 3-3/4" BOLT (2) BASE SUPPORT 3/8" FLAT WASHER (4) 3/8" LOCK NUT (2) RIGHT SHROUD BASE NOTES: SECURELY tighten bolt connections in this step.
  • Page 20 STEP 14 NOTE: NOTE: MAKE SURE SHROUD IS MAKE SURE SHROUD IS SEATED BETWEEN THE SEATED BETWEEN THE SHROUD SUPPORT AND SHROUD SUPPORT AND THE FOUR TABS AS SHOWN. THE FOUR TABS AS SHOWN. TOP VIEW LEFT TOP VIEW RIGHT RIGHT SHROUD BASE FRONT SHROUD (2) LEFT SHROUD BASE...
  • Page 21 STEP 15a 1/4 X 1/2" BOLT (4) 1/4" FLAT WASHER (4) TOP CAP NOTE: MAKE SURE INTERNAL GROOVES OF THE TOP CAP FIT DOWN OVER THE TOP EDGES OF BOTH FRONT SHROUDS. TOP BOOM SUPPORT FRONT SHROUD (LEFT SIDE) FRONT SHROUD (RIGHT SIDE) NOTES: LOOSELY tighten bolt connections in this step.
  • Page 22 STEP 15b 1/4 X 1/2" BOLT (2) 1/4" FLAT WASHER (2) TOP CAP TOP BOOM NOTES: SECURELY tighten bolt connections in this step, and previous step.
  • Page 23 STEP 16 NOTE: CENTER PLACARD ON SHROUD SURFACE. PLACARD FRONT SHROUD (RIGHT SIDE) 50-1/2" (127.6 CM) 1-7/8" (4.8 CM)
  • Page 24 STEP 17 1/2" LOCK NUT (4) 1/2" FLAT WASHER (8) 1/2 X 4-1/4" BOLT (4) ACCESSORY HOLDER (4) NOTE: MAKE SURE THE PIN OF THE ACCESSORY HOLDER GOES INTO THE BOTTOM HOLE BEFORE TIGHTENING BOLTS XCREATE UPRIGHT (2) NOTE: THE ACCESSORY HOLDERS CAN BE ASSEMBLED TO ANY SET OF HOLES ON THE UPRIGHT.
  • Page 25 STEP 18 ACCESSORY HOLDER (4) TRICEPS ROPE (2) SNAP HOOK (2) LEG BOOT SHORT HANDLE (2)
  • Page 26 STEP 19 1/4 X 3/8" BOLT (2) 1/4" FLAT WASHER (2) FRONT BASE COVER WEIGHT STACK BASE NOTES: SECURELY tighten bolt connections in this step.
  • Page 27 STEP 20 (OPTIONAL REAR SHROUD) TOP BOOM SUPPORT REAR SHROUD NOTE: MAKE SURE THAT THE FRONT SHROUDS ARE SEATED BETWEEN THE REAR SHROUD AND THE FOUR TABS AS SHOWN 3/8" FLAT WASHER (4) 3/8 X 1" BOLT (4) BASE SUPPORT REAR SHROUD NOTES: SECURELY tighten bolt connections in this step.

  • Page 28: Maintenance

    MAINTENANCE GUIDE RODS: Clean and lubricate with a silicone or teflon based lubricant INSPECTION: Once a month, check for loose bolts. Tighten if necessary. CABLES: Check tension, end fitting and cable coating. Replace if damage or worn. (NOTE: NEW CABLES ALWAYS STRETCH DURING USE.

This manual is also suitable for:

Xcreate-4cchm