Advertisement
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
The PAM-3 Power Accessory Module provides a wide variety of electrical outlets for the output of a
Tripp Lite UPS system. The PAM-3 may be hardwired to the output of a Unison SmartOnLine
SU6K or SU10K.
Safety:
• The PAM-3 features both 120V and 208/240V outlets. Make sure to connect equipment to
receptacles of the correct voltage.
• A total load of 30 amps can be drawn from the PAM-3. When connecting equipment,
take care not to exceed this current rating.
Connecting a PAM-3 to the Output of a SmartPro
DataCenter or PAM-1
• Simply plug your PAM-3's NEMA L14-30P plug into the NEMA L14-30R output
receptacle on the rear of your SmartPro DataCenter unit or on the front of your PAM-1.
Unison SmartOnLine
Copyright © 2000 Tripp Lite. All rights reserved.
®
and SmartPro DataCenter
Instruction Sheet
PAM-3
Power Accessory Module
®
are registered trademarks of Tripp Lite.
®
Advertisement
Table of Contents
Related Manuals for Tripp Lite Power Accessory Module PAM-3
Summary of Contents for Tripp Lite Power Accessory Module PAM-3
- Page 1 Customer Support: (773) 869-1234 www.tripplite.com The PAM-3 Power Accessory Module provides a wide variety of electrical outlets for the output of a Tripp Lite UPS system. The PAM-3 may be hardwired to the output of a Unison SmartOnLine SU6K or SU10K. Safety: •...
- Page 2 Connecting a PAM-3 to the Output of a Unison SU6K or SU10K WARNING: Before connection, make sure that your Unison system is OFF, that both input and output breakers are switched OFF and that the system is not connected to AC power. (See Unison Owner's Manual.) •...
Need help?
Do you have a question about the Power Accessory Module PAM-3 and is the answer not in the manual?
Questions and answers