Siemens SONOLINE G20 Installation Instructions Manual page 12

12
5. Verify the following startup sequence occurs:
- Verify the fan powers on.
- Verify the Standby button changes to green.
- Allow the boot sequence to complete, and then verify the correct illumination of the
I/O module LEDs.
Fig. 9:
Pos. 1
Pos. 2
Pos. 3
Pos. 4
Pos. 5
Pos. 6
Pos. 7
Pos. 8
Pos. V
NOTE
SONOLINE G20
SONOLINE G20 System Delivery Procedure
Successful Boot - LED Illumination
Off
Blinking
On
On
On
On
On
On or off - depending on control panel status
On
If the LEDs are not displayed as described, contact the Siemens
Uptime Service Center.
US06-101.812.01.02.02
10.04
Page 12 of 26
sd Medical Solutions USA, Inc.
Siemens