Makita DHW080 Instruction Manual page 11

► 1. Suction hose set
When using the container as a water tank
You can use the container supplied with the high pres-
sure washer (country specific) as a water tank.
1. Empty the container and feed water in it.
► 1. Full water level line
NOTICE:
Do not feed water above the full water
level line.
NOTICE:
The lid of the container is not a tight
seal type. Be careful not to spill the water in the
container when carrying.
2.
Disconnect the filter case from the hose of the
suction hose set.
1
► 1. Hose 2. Filter case
3. Remove the cap on the feed-water inlet and pass
the suction hose set through the inlet as illustrated.
1
3
► 1. Cap 2. Cap holder 3. Feed-water inlet 4. Suction
1 hose set
NOTE: The cap on the feed-water inlet can be rest on
the cap holder.
2
11 ENGLISH
2
4
1