Lightning And Surge Suppression; Parts And Tools Required; Enphase Equipment; Other Items - enphase IQ 7 Series Installation And Operation Manual

Lightning and Surge Suppression

Enphase Microinverters have integral surge protection, greater than most traditional inverters. However, if
the surge has sufficient energy, the protection built into the microinverter can be exceeded, and the
equipment can be damaged. For this reason, Enphase recommends that you protect your system with a
lightning and/or surge suppression device. In addition to having some level of surge suppression, it is also
important to have insurance that protects against lightning and electrical surges. Enphase has tested the
following devices:
•
Leviton 51110-SRG
•
Schneider SquareD HEPD50
NOTE: Protection against lightning and resulting voltage surge must be in accordance with
local standards.

Parts and Tools Required

In addition to the microinverters, PV modules, and racking, you will need the following:

Enphase Equipment

•
Enphase IQ Envoy: Required to monitor production. IQ Envoy (model ENV-IQ-AM1-240)
communications gateway or IQ Combiner (model X-IQ-AM1-240-B, X-IQ-AM1-240-2, X-IQ-
AM1-240-3, X-IQ-AM1-240-3C).
•
Enphase Installer Toolkit: Download the Enphase Installer Toolkit mobile app,
open it, and log in to your Enlighten account. Use it later to scan microinverter
serial numbers and connect to the IQ Envoy to track system installation progress.
To download, go to
•
Tie wraps or Q Cable Clips (Q-CLIP-100)
•
Enphase Sealing Caps (Q-SEAL-10) for any unused drops on the Enphase Q Cable
•
Enphase Terminator (Q-TERM-10) typically two needed per branch circuit
•
Enphase Disconnect Tool (Q-DISC-10)
•
Enphase Field Wireable Connectors (male and female: Q-CONN-10M and Q-CONN-10F)
•
Enphase Q Cable:
Cable Model
Q-12-10-240
Q-12-17-240
Q-12-20-200

Other Items

•
Enphase Q Aggregator or AC junction box
•
Number 2 and 3 screwdrivers
•
Wire cutters, voltmeter
•
Torque wrench, sockets, wrenches for mounting hardware
•
DC disconnect tool for the DC connector type used
14
IQ 7 / IQ 7+ / IQ 7X / IQ 7A with EN4 Bulkhead Installation and Operation
enphase.com/toolkit
Connector Spacing
1.3m Portrait
2.0m Landscape (60-cell)
2.3m Landscape (72-cell)
© 2020 Enphase Energy Inc. All rights reserved.
or scan the QR code at right.
PV Module Connector Count per
Orientation
240
240
200
box
141-00047-01