Tripp Lite SmartPro Datacenter INT Owner's Manual
  1. Manuals
  2. Brands
  3. Tripp Lite Manuals
  4. UPS
  5. SmartPro Datacenter INT
  6. Owner's manual
Tripp Lite SmartPro Datacenter INT Owner's Manual

Tripp Lite SmartPro Datacenter INT Owner's Manual

Intelligent, line-interactive ups systems (230v output)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Safety:

Quick Installation:

Basic Operation:
Storage & Service:
Specifications:
Copyright ©2000 Tripp Lite. All rights reserved. SmartPro
Owner's Manual
SmartPro
Datacenter INT
Intelligent, Line-Interactive
UPS Systems (230V Output)
p. 2
p. 5 - 7
p. 8
p. 8
®
is a registered trademark of Tripp Lite.
®
p. 3 - 4
1

Advertisement

Table of Contents
loading

Related Manuals for Tripp Lite SmartPro Datacenter INT

Summary of Contents for Tripp Lite SmartPro Datacenter INT

  • Page 1: Quick Installation

    Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.tripplite.com Safety: Quick Installation: Basic Operation: Storage & Service: Specifications: Copyright ©2000 Tripp Lite. All rights reserved. SmartPro Owner's Manual SmartPro Datacenter INT Intelligent, Line-Interactive UPS Systems (230V Output) p. 2 p. 3 - 4 p.

  • Page 2: Ups Location Warnings

    Equipment Connection Warnings • Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

  • Page 3: Power Module

    Quick Installation Position your External Battery Pack(s). • If positioning multiple Battery Packs, place them side by side or stack them no more than three high. Position your Power Module. • The Module may be stacked on top of your Battery Packs or placed beside them.
  • Page 4 Computer Communications (Optional)* DB9 Port Connection –Optional–* Using the grey or tan Tripp Lite cable that came with your UPS, connect your primary server’s DB9 port to the single DB9 port labeled “LAN 4.1” or "Smart LAN Primary" (which provides complete intelligent RS-232 communications).**...

  • Page 5: Basic Operation

    If this occurs, let the UPS charge for 12 hours and perform a second self-test. If the light continues to stay on, contact Tripp Lite for service. CAUTION: Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections.

  • Page 6: Indicator Lights

    UPS battery is less than fully charged. If it lights, let the UPS charge for 12 hours, then perform a self-test. If the light continues to stay on, contact Tripp Lite for service. This multi-colored light displays 4 separate UPS load conditions.
  • Page 7 Contact Tripp Lite Customer Support for more information. Battery Connector (Rear Panel) Use to connect Tripp Lite battery packs. Refer to the label next to the connector for the appropriate Tripp Lite battery pack to connect. Refer to instructions available with the battery pack for complete connection information and safety warnings.

  • Page 8: Storage And Service

    Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC TVSS Protection Modes (H to N, H to G, N to G). The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change. SMARTDC3000INT...

Table of Contents