1. Manuals
  2. Brands
  3. Reece Manuals
  4. Toilets
  5. Ciclon L T-604
  6. Installation instructions and maintenance manual

Reece Ciclon L T-604 Installation Instructions And Maintenance Manual

Waste disposer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION
INSTRUCTIONS
AND MAINTENANCE
GUIDE
T-604 WASTE DISPOSER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ciclon L T-604 and is the answer not in the manual?

Questions and answers

Related Manuals for Reece Ciclon L T-604

Summary of Contents for Reece Ciclon L T-604

  • Page 1 INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE T-604 WASTE DISPOSER...

  • Page 3: Table Of Contents

    ........... . contractor to AS/NZS 3000. INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE - 1 Reece Product Code: TBA Date of Issue: TBA...

  • Page 4: Main Components

    2. MAIN COMPONENTS 1.- Tank 2A.- Lids 2B.- Lid Joints 3.- Discharge outlet Ø 40mm Auxiliary inlet 5.- Flexible pan connector 6.- Earthed power supply cable 2 - INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE Reece Product Code: Date of Issue:...

  • Page 5: Introduction

    In case of excessively long operation, or if the waste disposer runs continuously, it is necessary to check for leaks from the cistern to the pan or in the other connected fixtures INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE - 3 Reece Product Code: Date of Issue:...

  • Page 6: Mounting Assembly Of System

    - In combined installations (vertical and horizontal), it must be considered that 1m of vertical eleva- tion is equivalent to approximately 10m of pipe at 1% (1:100) gradient. Reece Product Code: 4 - INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE Date of Issue:...

  • Page 7: Installation Recommendations

    It should never be installed in wall-embedded installa- tions, behind walls, etc, as they prevent the correct ventilation of the motor, which incorporates a self-ventilating mechanism. INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE - 5 Reece Product Code: Date of Issue:...

  • Page 8: Connection To Power Supply

    Cistern mounted disinfection may cause pre- mature destruction of flush valve rubbers. - Along with this instruction manual, an adhesive label is provided to be fixed in a visible area (we 6 - INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE Reece Product Code: Date of Issue:...

  • Page 9: Maintenance Operations

    Ensure that there is no return to the waste disposer through the non-return valve of the discharge pipe due to an improper closing (verify that the clapper fits properly). (see replacement-cleaning of the non-return valve on page 10). INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE - 7 Reece Product Code: Date of Issue:...
  • Page 10 - Perform the descaling process as to lime scale remains. described on page 7. The micro-switch that activates the - Contact your local Reece store. pump motor does not work properly. - The auxiliary connection or the - Clean the waste pipe from the auxiliary - The motor only works when the WC non-return valve is blocked.
  • Page 11 Unscrew the nine fixing cassette screws Put the cassette cover again Disconnect the electrical connections and extract the cassette to be replaced. INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE - 9 Reece Product Code: Date of Issue:...

  • Page 12: Replacement/Cleaning Non-Return Valve

    - To assemble the valve, follow the steps in NON-RETURN JOINT reverse order. Before operating the waste disposer again, and for the purpose of eliminating air within the discharge installation, flush the cistern several times. 10 - INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE Reece Product Code: Date of Issue:...

  • Page 13: Technical Specifications

    NOTICE: All data provided in this technical catalogue, due to the constant improvement and evolution of our products, can be modified without notice from time to time. This catalogue has no contractual nature and the information is provided in good faith. INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE - 11 Reece Product Code: Date of Issue:...

  • Page 14: Technical Diagrams

    C – INLET WASTE PIPE 2.5% (1:40) GRADIENT. D – *LOCATION OF POWER SUPPLY MUST BE IN ACCORDANCE WITH AS/NZS 3000 AND MUST BE INSTALLED BY A LICENCED ELECTRICIAN. 12 - INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE Reece Product Code: Date of Issue:...

  • Page 15: Waste Disposer Unit Dismantling

    15 TANK FACING LID 31) 11/2” MF NUT 16 CASSETTE FACING LID TUBE ADAPTOR Ø32 X 25NB 25MM PVC PRESSURE 17A) CASSETTE PIPE 17B) CASSETTE GASKET JOINT INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE - 13 Reece Product Code: Date of Issue:...
  • Page 16 15) ROTOR CLAMPING SCREW 6) ENTRY BOOTS 16) CASSETTE ROTOR LID 7) MOTOR 17) ROTOR LID SCREW 8) MOTOR INSULATING DISC 9) PRESSURE SWITCH (W/SCREW) 11. DIMENSIONS 14 - INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE Reece Product Code: Date of Issue:...
  • Page 17 OF CONSTRUCTION AND TESTING - PART 4: NON-RETURN VALVES FOR FAECAL FREE WASTE WATER AND WASTE WATER CONTAINING FAECAL MATTER ATS 5200.101 LIC.WMKT22039 The Manufacturer ñ c i l ñ INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE - 15 Reece Product Code: Date of Issue:...
  • Page 18 WARRANTY & CARE DETAILS Dear Customer, This is the warranty by Reece Pty. Ltd. relating to your product. Please keep it together with your purchase receipt. In the event of a query please contact your nearest Reece Plumbing Centre. Warranty You have purchased a quality product from Reece Australia.
  • Page 19 Notes...
  • Page 20 Reece Product Code: Date of Issue:...

Table of Contents