27 CARTRIDGE REPLACEMENT
Turn off water supplies and relieve pressure before working on your faucet (see
step 2). Remove Handle (see step 26). Remove Dome Cap (27A) by unscrewing
it in a counterclockwise direction and remove Spacer (27B). Using an adjustable
wrench, unscrew Retainer Ring (27C). Carefully remove Cartridge (27D) by
pulling it straight up and out. Inspect Cartridge (27D) for debris or damage.
Clean or replace Cartridge (27D). Reassemble faucet by reversing steps
28 DIVERTER MAINTENANCE
If the side spray fails to work properly the diverter mechanism may be clogged
with debris or may need replacing. To check and/or replace Diverter (28A),
shut off water supply and relieve pressure before working on your faucet (see
step 2). Remove handle (see step 26) and Dome Cap (28B) and carefully lift up
Spout Assembly (28C). Diverter Mechanism (28A) is located on the backside
of Inner Faucet Body (28D). Carefully remove by pulling Diverter Mechanism
(28A) straight out and check for debris. Clean or replace Diverter Mechanism
(28A). Reassemble faucet by reversing steps.
Replacement parts may be available at the store where you purchased
When replacement parts are not available, please write or call Price
Pfister Consumer Service.
Always turn off water and relieve pressure before working on your
NOTE: Trim Care
For all Handles and decorative finishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
For Toll-Free Pfaucet information call
or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information