Advertisement
2. With the original clock removed, carefully maneuver the VLC clock in place while lining up the
mounting locations and secure the gauge with the supplied screws and nuts as well as the retained
nuts from disassembly.
3. Connect the CAT5 cable and the power
harness to the clock. Route the other ends
to the VHX control box. Refer to enclosed
clock operating manual for these
connections and setup.
Supplied
Screws
Supplied
Nuts
st
4510 W. 61
St. N., Sioux Falls SD 57107
Phone: (605) 332-6513 Fax: (605) 339-4106
www.dakotadigital.com
dakotasupport@dakotadigital.com
Manual # 650520
Advertisement
