10- Installation - Haier HRF-636I 6 Series User Manual

10- Installation

10.1 Unpacking
WARNING!
▶ The appliance is heavy. Always handle with at least two persons.
▶ Keep all packaging materials out of children's reach and dispose them in an environ-
mentally friendly manner.
▶
Take the appliance out of the packaging.
▶
Remove all packaging materials including the transparent protective film.
10.2 Environmental conditions
The room temperature should always be between 10 °C and 43 °C, since it can influence
the temperature inside the appliance and its energy consumption. Do not install the appli-
ance near other heat-emitting appliances (ovens, fridges) without isolation.
10.3
161 cm
10.4
>10 cm
10.5 Fresh water connection
Follow the installation instructions below (Fig. 10.5-1 to Fig. 10.5-5).
WARNING!
▶ It is recommended to have the appliance installed by a qualified technician.
▶ Make sure that the mains plug is disconnected from the mains socket.
▶ Make sure the water supply is blocked.
▶ A shut-off valve which must be easy accessible after installation must be installed
between the hose and the domestic water connection in order to be able to interrupt
the water supply if necessary.
▶ Only connect to cold water supply.
▶ Use only the supplied hose set for the connection.
32
10.3 Space requirement
10 cm
Required space when door is opened (Fig. 10.3):
Appliance width: 161 cm
Appliance depth: 112 cm
112 cm
10.4 Ventilaton cross-section
To achieve sufficient ventilation of the appliance for
safety reasons, the information of the required ventila-
tion cross sections must be observed (Fig. 10.4).
>10 cm
GB