Advertisement
SETUP
設置
Install filters
Install the filters (2 types) and front
panel.
安裝過濾網(2種)和前面板。
Install deodorizing filter.
(There is no distinction between inside and outside,
upper and lower.)
安裝脫臭過濾網。(無內外、上下的區分）
Install HEPA composite filter.
(There is distinction between inside and outside, no
distinction between upper and lower.)
安裝HEPA多功能過濾網。(有內外的區分、無上下的區分）
With the black side (front side )
toward yourself, fit it into the
concave part of the product.
將黑色面(正面)朝外，放入機體的
。
凹部
Concave part
of the product
機體的凹部
Install front panel.
安裝前面板。
Fit the clutch into the indentation
(2 places) of the product.
使鈎爪與產品上的凹槽(2處)咬合
Push in the protrusion into holes (2 places) of product
and press properly.
將前面板的凸起處插入產品上的小孔(2處)，並且向下按到底。
Notice 提示事項
Make sure to attach the front panel before use.
使用前請務必安裝好前面板。
12
安裝過濾網
。
Fill water into tank
Remove the tank, fill it with
water, then install it back.
取出水箱加水，並裝回水箱。
(Not required if the product operates
in the mode of "Clean Air.")
(空氣淨化模式運轉時，不需要加水。)
Make sure to disconnect the
power plug before filling water.
加水前，請務必拔出電源插頭。
The upper position and lower position of the
tank shall be reversed when you fill it with
water to that when you install it back.
加水時，以及將水箱放回時，水箱上下位置相反。
Press the hook, and remove the tank.
按下掛鈎，取出水箱。
Hook
掛鈎
Tank
水箱
Please check whether
the anti-fungus
assembly is installed
properly (P.19).
請確認防霉組件安裝
是否正確(第19頁)。
Remove the cover.
擰開水箱蓋。
加水至水箱
Tank
水箱
Anti-fungus
assembly
防霉組件
Tray
水盤
Advertisement
