Toothbrush Handle - Philips sonicare ProtectiveClean 4700 Instructions Manual

Toothbrush handle

Brush head
Charger
Storage
1 Remove the brush head and rinse the metal
shaft area with warm water. Make sure you
remove any residual toothpaste.
Caution: Do not push on the rubber seal on
the metal shaft with sharp objects, as this
may cause damage.
2 Wipe the entire surface of the handle with a
damp cloth.
Note: Do not use isopropyl rubbing alcohol,
vinegar or bleach to clean handle as this
may cause discoloration.
1 Rinse the brush head and bristles after each
use.
2 Remove the brush head from the handle
and rinse the brush head connection with
warm water at least once a week.
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a
damp cloth.
If you are not going to use your Philips
Sonicare for an extended period of time,
unplug the charger from the wall socket, clean
it and store it in a cool and dry place away
from direct sunlight.
21
English