Model #: P952-002
2-ft. SATA to eSATA Transition Cable (7Pin/7Pin)
Description
With Tripp Lite's P952-002, SATA to eSATA bracket/cable, you can connect an external eSATA hard drive to your internal SATA controller. Simply
plug the standard 7-pin SATA connector into an available port on your controller card or motherboard, and the bracket into an available external I/O
slot. No software to load...completely plug and play. 24" cable provides plenty of length to connect any where inside a PC case. 26AWG cable rated
to handle current 3Gbps SATA speeds.
Features
Connect external eSATA drives to your SATA internal controller card
SATA-II rated 3Gbps, 24", 26AWG cable
Plug-n-Play
7pin SATA "L" type connector (Internal) to 7pin "I" type connector (external)
Specifications
OVERVIEW
Intended Application
INPUT
Cable Length (ft.)
Cable Length (m)
PHYSICAL
Color
Style
CONNECTIONS
Connector A
Highlights
Connecting Peripherals
2
0.61
Red
SATA
7 PIN SATA STRAIGHT (MALE)
Connect external eSATA drives to your SATA internal controller card
2ft SATA-II rated 3Gbps cable
Plug-n-Play
7pin SATA "L" type connector (Internal) to 7pin "I" type connector (external)
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail:
saleshelp@tripplite.com