AFG Amber Manual

Changing table

Hide thumbs

page of 16

/ 16
Bookmarks

Quick Links

Download this manual

Model No.: M007

PO #:

Serial #:

Amber

Changing Table

THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.

If you have any questions or missing parts, please contact us. DO NOT return product

parts to the store where it was purchased before contacting AFG Customer Service.

AFG Customer Service:

E-mail: service@afgbabyfurniture.com

Tel: (323) 722-6268

Need help?

Do you have a question about the Amber and is the answer not in the manual?

Questions and answers

Summary of Contents for AFG Amber

Page 1 THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. If you have any questions or missing parts, please contact us. DO NOT return product parts to the store where it was purchased before contacting AFG Customer Service. AFG Customer Service: E-mail: service@afgbabyfurniture.com...
Page 2 • To avoid head injury, do not allow your child to play underneath open drawers. • Child must be securely fastened to changer unit when the unit is in use. • Always monitor your child’s activity when in the nursery. 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 3 M007 Changer Parts Identification Sheet DO NOT assemble changer if parts and hardware are defective or missing. Contact AFG for exchange or keep the original box for return authorization. ~ Changer Assembly Parts A. Left Side Panel (1 pc) B. Right Side Panel (1 pc) C.
Page 4: Phillips Screwdriver
8. wood Screw F4 x 1” (16 pcs) 9. wood screw F4 x 5/8” (12 pcs) 10. Drawer Knob (2 pcs) (2 pcs) 11. Bolt 5/32” x 1” 12. Wrench (1 pc) PHILLIPS SCREWDRIVER (NOT INCLUDED) 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 5 Drawer Bottom Panel (2 pc) Knobs (2 pcs) ~ Changer Top Top Front Panel (1 pc) Top Back Panel (1 pc) Top Side Panels (2 pcs) Top Panel (1 pc) Top Rail (2 pcs) 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 6 Left Side Panel (1 pc) Right Side Panel (1 pc) Front Middle Rail (1 pcs) Front Base Rail (1 pc) Low Back Panel (1 pc) Shelf (1 pc) Upper Back Panel (1 pc) 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 7 Attach Drawer Left Side Panel (D) and Drawer Right Side Panel (E) to Drawer Front Panel (C) with 4 screws (#8). STEP 2: Slide Drawer Bottom Panel (G) into the grooves of the side panels. 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 8 Attach Drawer Back Panel (F) to side panels with 4 screws (#8). Make sure all screws are tightly secured. STEP 4: Attach Knobs (#10) to Drawer Front Panel with 1 Bolts (#11). Repeat above steps to assemble the other drawer. 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 9 STEP 2: Insert Barrel Nuts (#7) into Top Front Panel, Top Back Panel and Top Side Panels before inserting Bolts (#3) from the underside of Top Panel (K). Tighten firmly with Wrench (#12). 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 10 M007 Changer Top Assembly STEP 3: Turn the changer top bottom side up, and then attached two Upper Front Rail(L) , top top panel with Bolts(#5). Tighten firml;y with Philps Head Screwdriver(not included). 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 11 2 Bolts(#1) and tighten firmly with Wrench (#12). b. Attach Front Moddle Rail(M) and Front Base Rail(N) to Right Panel (A), using 1 Bolts(#1) and 1 dowel(#6), tighten firmly with Wrench (#12). 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 12 M007 Changer Assembly STEP 3: Attached Middle Shelf(P), using 4 Bolts(#4), Tighten firmly with wrench (#12). STEP 4: Place Changer Top Assembly to Changer Assembly Unit. 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 13 Wrench (#12) STEP 6: Install Upper Back Panel , using 12 wooden screw (#9), Tighten firml with Philps Head Screwdriver(not included). M007 Changer Assembly STEP 7: Slide the drawers inside the changer 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 15 1/8” pilot hole through the wall stud and into the plaster wall. CAUTION: The changer unit must be centered on a wall stud as shown. If you are unsure of how to locate the wall stud, contact a professional contractor. 2014 AFG Baby Furniture M007 Assembly Sheet ©...
Page 16 In the event that AFG determines that a defect that may result from customer abuse or misuse, we will contact you with information about services and methods to prevent occurrences. We strongly recommend you register your product with our company by filling out registration and mailing it back to us.

This manual is also suitable for:

M007