Download Table of Contents Print this page

Cleaning And Storage; Troubleshooting; Product Specifications - Honeywell TURBOFORCE HHF550 Series Manual

Advertisement

Available languages
Table of Contents
SAFETY FEATURES
The Honeywell TurboForce® Heater is equipped with several features for added protection:
• A 360° tip-over switch that disables the heater if it is tipped in any direction.
• A high temperature safety sensor prevents overheating.
• This heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater should
it operate at a higher than normal temperature. If activated, the unit will need to be replaced.
• This heater was built using a high temperature plastic and has a cool to touch housing and handle.
• This heater is designed with thermal insulated wiring for heat resistance and reinforced wire connections
to help protect against loose connections.
• The HHF565 Series models also include a SafeGuard® Auto Shut-Off feature. If selected, this feature is designed
to automatically shut the heater off after 8 hours of continuous use.

CLEANING AND STORAGE

It is recommended that the Honeywell TurboForce® Heater be cleaned at least once a month and before
off-season storage.
• Turn Off ( ) and unplug heater. Allow unit to cool for 10 minutes.
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES, POLISHES
OR ANY CHEMICAL SOLUTION.
• Before storing, clean the TurboForce® Heater using the above-mentioned steps. Wrap the cord around the unit.
Place in its original box and store it in a cool, dry place.
• This heater does not disassemble.

TROUBLESHOOTING

Problem
If your Honeywell TurboForce®
Heater shuts off unexpectedly or
fails to operate, one of your heater
safety features may have been
activated to prevent overheating.

PRODUCT SPECIFICATIONS

Model(s)
HHF550 Series
HHF565 Seriess
Solution
• Be sure heater is plugged in and that the electrical outlet is working.
• Check for any obstructions. If you find an obstruction, turn the heater OFF
( ) and unplug it.
• Allow the heater to cool completely, then remove the obstruction. Wait at
least 10 minutes, then re-plug the heater in and follow the OPERATION
instructions.
Unit Dims
10.1" L x 10.1" W x 12.6" H
10.1" L x 10.1" W x 12.6" H
Amps
Unit Voltage
12.5
120V, 60Hz
12.5
120V, 60Hz
6
Max Watts
Max BTUs
1500
5118
1500
5118

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Turboforce hhf565 series

Table of Contents