Microfibre cloth with honeycomb structure Product no. 460770
Door lock
Before using for the first time
This section tells you everything you need to do before using
the appliance for the first time.
Set the clock
■
Change the language for the text display as required
■
Change the supply voltage
■
Heat up the cooking compartment
■
Clean the accessories
■
Read the safety information at the front of the instructions for
■
use. It is very important.
Initial setup
Once your new appliance is connected, "Uhrzeit einstellen" (set
clock) appears in the status bar at the top. Set the time, and
also the text display language, if required. German is the default
language.
8KU]HLW HLQVWHOOHQ
8KU]HLW
Setting the clock and changing the language
Turn the rotary selector to set the current time.
1.
Move to "Sprache wählen: deutsch" (select language:
2.
German) in the right-hand settings area using the
Select the desired language using the rotary selector.
3.
Press the
button.
0
4.
The language and time are saved. The current time is shown in
the display.
Note: You can change the language at any time. See the Basic
settings section.
Switch the oven on and off
You can switch the oven on and off with the
Switching on
Press the
button.
‡
The Siemens logo appears. Select the required operating
mode.
button = types of heating
"
■
button = automatic programmes
X
■
button = saved memory setting
l
■
V
button = self-cleaning
■
6
Product no. 612594
6SUDFKH ZlKOHQ
GHXWVFK
¿
button.
‡
button.
Especially suitable for cleaning delicate surfaces, such
as glass, glass ceramic, stainless steel or aluminium. The
microfibre cloth removes liquid and grease deposits in one go.
To prevent children from opening the oven door. The locks on
different types of appliance door are screwed in differently.
See the information sheet supplied with the door lock.
Changing the supply voltage
Before you use your appliance for the first time, change the
supply voltage to 230240 V.
The supply voltage can be changed at any time.
See the Basic settings section.
Heating up the cooking compartment
To get rid of the new cooker smell, heat up the cooking
compartment when it is empty and the oven door closed.
Make sure that the cooking compartment contains no leftover
packaging, e.g. polystyrene pellets.
Ventilate the kitchen while the oven is heating up.
Set
%
Top/bottom heating and a temperature of 240 °C.
Press the
button.
‡
1.
The Siemens logo appears.
Immediately press the
"
2.
The
:
3D hot air heating type and a temperature of 160 °C
are suggested.
Turn the rotary selector to change the type of heating to
3.
Top/bottom heating.
%
Move to the temperature using the
4.
temperature to 240 °C using the rotary selector.
Press the
button.
†
5.
Appliance operation begins.
Switch the oven off after 60 minutes using the
6.
The time appears in the display.
The temperature indicator bars show the residual heat in the
cooking compartment.
For detailed information on how to set the type of heating and
temperature, refer to the Setting the oven section.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
If you do not select an operating mode within a few seconds,
the 3D hot air type of heating and 160 °C are suggested.
7\SHV RI KHDWLQJ
' KRW DLU
You can select a different operating mode at any time.
You can read how to make settings in the various sections.
button.
¿
button and change the
‡
button.
&