Bush Hog RTXG Series Operator's Manual

Roto hog

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Published 05/19

OPERATOR'S MANUAL

This Operator's Manual is an integral part of the safe operation of this machine and must

be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety

and Operation Instructions contained in this manual before operating the equipment. C01-

Cover

BUSH HOG

2501 Griffin Ave.

Selma, AL 36703

334-874-2700

www.bushhog.com

Made in China

RTXG SERIES

TILLERS

(ROTO HOG)

RTX85G, RTX92G

Part No.

50075826

Table of Contents

Need help?

Do you have a question about the RTXG Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Bush Hog RTXG Series

Page 1 RTXG SERIES TILLERS (ROTO HOG) RTX85G, RTX92G 50075826 Published 05/19 Part No. OPERATOR’S MANUAL This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment.
Page 2 BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! For future reference, record your Bush Hog product model number and serial number. Dealer Telephone Model Number...
Page 3: Table Of Contents
TABLE OF CONTENTS SAFETY SECTION ......................1-1 General Safety Instructions and Practices ......................1-2 Operator Safety Instructions and Practices ....................... 1-4 Equipment Operation Safety Instructions and Practices ..................1-5 Transporting Safety Instructions and Practices ....................1-6 Maintenance and Service Safety Instructions and Practices ................1-7 Storage and Parking Safety Instructions and Practices ...................
Page 4 Shutting Down the Implement .......................... 4-21 DISCONNECTING THE IMPLEMENT FROM THE TRACTOR ...............4-22 IMPLEMENT STORAGE ..........................4-23 TRANSPORTING THE TRACTOR AND IMPLEMENT ................... 4-23 DRIVING THE TRACTOR AND IMPLEMENT ....................4-23 Brake and Differential Lock Setting ........................4-25 Transporting on Public Roadways ........................4-26 Hauling the Tractor and Implement ........................
Page 5: Safety Section
SAFETY SECTION Safety Section 1-1...
Page 6: General Safety Instructions And Practices
Safety Messages. Always use good common sense to avoid hazards. (SG-2) Always maintain the safety signs in good readable condition. If the safety signs are missing, damaged, or unreadable, obtain and install replacement safety signs immediately. (SG-5) RTXG SERIES TILLER 5/19 Safety Section 1-2 © 2020 Alamo Group Inc.
Page 7 (SG-12) Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of its components or any Implement function. (SG-8) RTXG SERIES TILLER 5/19 Safety Section 1-3 © 2020 Alamo Group Inc.
Page 8: Operator Safety Instructions And Practices
Do not put hands or feet under implement as it can result in death or serious injury. Stay away until all motion has stopped and the frames are securely blocked up. (STL-3) RTXG SERIES TILLER 5/19 Safety Section 1-4 © 2020 Alamo Group Inc.
Page 9: Equipment Operation Safety Instructions And Practices
(SG-23) Do not exceed the rated PTO speed for the Implement. Excessive PTO speeds can cause Implement driveline or component failures resulting in serious injury or death. (SG-26) RTXG SERIES TILLER 5/19 Safety Section 1-5 © 2020 Alamo Group Inc.
Page 10: Transporting Safety Instructions And Practices
Dropping implement in transport can cause serious damage to the tractor and/or Implement and possibly cause the operator or others to be injured or killed. (S3PT-02) RTXG SERIES TILLER 5/19 Safety Section 1-6 © 2020 Alamo Group Inc.
Page 11: Maintenance And Service Safety Instructions And Practices
(S3PT-11) Always maintain the safety signs in good readable condition. If the safety signs are missing, damaged, or unreadable, obtain and install replacement safety signs immediately. (SG-5) RTXG SERIES TILLER 5/19 Safety Section 1-7 © 2020 Alamo Group Inc.
Page 12 This website, operated by California's Office of Environmental Health Hazard Assessment, provides information about these chemicals and how individuals may be exposed to them. RTXG SERIES TILLER 5/19 Safety Section 1-8 © 2020 Alamo Group Inc.
Page 13 Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in such a way as to be clearly visible and legible. When transporting the Equipment use the Tractor flashing warning lights and follow all local traffic regulations. (SG-6) RTXG SERIES TILLER 5/19 Safety Section 1-9 © 2020 Alamo Group Inc.
Page 14: Storage And Parking Safety Instructions And Practices
Implement and Tractor hitches. (S3PT-15) To prevent tipping of Implement when stored in folded position, use carrying wheels or adequate stands on center frame. (S3PT-6) RTXG SERIES TILLER 5/19 Safety Section 1-10 © 2020 Alamo Group Inc.
Page 15: Parts Information
These parts are made and tested to Bush Hog specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts may reduce equipment performance, void warranties, and present a safety hazard. Use genuine Bush Hog parts for economy and safety.
Page 17 Rotating Driveline Hazard 50074033 DANGER Multi-Hazard 50076462 LOGO Gear Driven Decal 50075245 LOGO Roto Hog Decal ------------- REFLECT 50031212 REFLECT Amber Reflector 50031214 REFLECT Red Reflector D960 WARNING P65 Warning.CA.gov RTXG SERIES TILLER 5/19 Safety Section 1-13 © 2020 Alamo Group Inc.
Page 20: Federal Laws And Regulations
Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102.) RTXG SERIES TILLER 5/19 Safety Section 1-16 © 2020 Alamo Group Inc.
Page 21: Introduction Section
INTRODUCTION SECTION Introduction Section 2-1...
Page 22 Chain Guards or Rubber Deflectors for Agricultural purposes as well, to reduce the risk of property damage, serious bodily injury, or even death from objects thrown out by or from contact with the Cutting Blades. RTXG SERIES TILLER 5/19 Introduction Section 2-2 © 2020 Alamo Group Inc.
Page 23 Front and rear, and left and right are determined by the normal direction of travel (the same as on your automobile). Carefully read the Operator’s Manual completely, understand the Safety Messages and instructions, and know how to operate correctly both the tractor and tiller. RTXG SERIES TILLER 5/19 Introduction Section 2-3 © 2020 Alamo Group Inc.
Page 24 3. Record the Rake Model and Serial Numbers on the Warranty page at the front of the Operator’s Manual. Keep this as part of the permanent maintenance file for the implement. RTXG SERIES TILLER 5/19 Introduction Section 2-4 © 2020 Alamo Group Inc.
Page 25 2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgment of Bush Hog such use affects its performance, stability or reliability.
Page 27: Assembly Section
ASSEMBLY SECTION Assembly Section 3-1...
Page 28 ASSEMBLY Bush Hog RTXG series Tillers are shipped from the factory partially assembled in a shipping crate and requires some assembly before being placed into service. Follow these instructions listed to safely remove the Tiller from the shipping crate and prepare for assembly 1.
Page 29 Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death. (SG-14) RTXG SERIES TILLER 5/19 Assembly Section 3-3 © 2020 Alamo Group Inc.
Page 30: Driveline Attachment
Safety Manual for more information on the safe use of a driveline during normal operation and maintenance. Or type in your internet browser the following web address: www.algqr.com/dme Ops-0009-MISC RTXG SERIES TILLER 5/19 Assembly Section 3-4 © 2020 Alamo Group Inc.
Page 31: Lubrication
2. Pour the gear oil into the vent plug hole slowly checking the oil level with the dip stick until the oil reaches the full mark on the dip stick. DO NOT OVERFILL THE GEARBOX! 3. Replace the vent plug and dip stick. Clean up any excess gear oil. RTXG SERIES TILLER 5/19 Assembly Section 3-5 © 2020 Alamo Group Inc.
Page 32 Use 90W Gear Oil in the Outboard Bearing located on the right hand side of the tiller. Fill until 1/2 to 3/4 full to allow for oil expansion. RTXG SERIES TILLER 5/19 Assembly Section 3-6 © 2020 Alamo Group Inc.
Page 33: Operation Section
OPERATION SECTION Operation Section 4-1...
Page 34 OPERATION BUSH HOG RTXG SERIES TILLER OPERATION INSTRUCTIONS The Tiller is manufactured with quality material by skilled workers. This implement is ideal in horticultural, agricultural, or commercial applications, especially for landscapers, rental yards, vineyards, vegetable farms, and nurseries. The implement is equipped with protective deflectors to prevent objects being thrown from the implement by the blades, however, no shielding is 100% effective.
Page 35: Standard Equipment And Specifications
Operating this implement in an application for which it is not designed and/or operating the implement with the wrong size Tractor can cause implement component damage and equipment failure resulting in possible serious injury or death. RTXG SERIES TILLER 5/19 Operation Section 4-3 © 2020 Alamo Group Inc.
Page 36: Operator Requirements
Serious injury or death to the operator or others could result if the operator is under the influence of drugs or alcohol. (SG-27) RTXG SERIES TILLER 5/19 Operation Section 4-4 © 2020 Alamo Group Inc.
Page 37: Tractor Requirements
(ROPS). Always wear seat belts. Serious injury or even death could result from falling off the tractor, particularly during a turnover when the operator could be pinned under the ROPS. (SG-7) RTXG SERIES TILLER 5/19 Operation Section 4-5 © 2020 Alamo Group Inc.
Page 38: Tractor Safety Devices
Height from bottom hitch pin to top pin....... 19” Lower pin diameter..........7/8” Lower pin diameter............ 7/8” Upper pin diameter..........3/4” Upper pin diameter............1” Linch pin diameter..........15/32” Linch pin diameter ..........15 32” RTXG SERIES TILLER 5/19 Operation Section 4-6 © 2020 Alamo Group Inc.
Page 39: Front End Weight
Never allow passengers to ride on the tractor or attached equipment. Riders can easily fall off and be seriously injured or killed from falling off and being ran over. It is the operator’s responsibility to forbid all extra riders at all times. OPS-U- 0008 RTXG SERIES TILLER 5/19 Operation Section 4-7 © 2020 Alamo Group Inc.
Page 40: Dismounting The Tractor
Never dismount a Tractor that is moving or while the engine is running. Operate the Tractor controls from the tractor seat only. (SG-9) RTXG SERIES TILLER 5/19 Operation Section 4-8 © 2020 Alamo Group Inc.
Page 41: Starting The Tractor
Always shut the Tractor completely down, place the transmission in park, and set the parking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches. (S3PT-15) RTXG SERIES TILLER 5/19 Operation Section 4-9 © 2020 Alamo Group Inc.
Page 42: Connecting The Implement
IMPORTANT: Scan this QR Code with your smart phone to link to the PAMI Safe Implement Hitching Manual for more information on correctly connecting agricultural tractors to implements. Or type in your internet browser the following web address: www.algqr.com/hme Ops-0008-MISC RTXG SERIES TILLER 5/19 Operation Section 4-10 © 2020 Alamo Group Inc.
Page 43: Setting Implement Height
PTO shaft. Push and pull the driveline back and forth several times to ensure a secure attachment. OPS-R-0003_D RTXG SERIES TILLER 5/19 Operation Section 4-11 © 2020 Alamo Group Inc.
Page 44: Driveline Length Check
2” at any point, contact your local dealer or tech service for proper directions. OPS-T-0014 RTXG SERIES TILLER 5/19 Operation Section 4-12 © 2020 Alamo Group Inc.
Page 45: Pre-Operation Inspection And Service
Implement. Never work on the Implement with the tractor PTO driveline connected and running. Rotating Parts, or Drivelines could turn without warning and cause immediate entanglement, injury or death. (S3PT-11) RTXG SERIES TILLER 5/19 Operation Section 4-13 © 2020 Alamo Group Inc.
Page 46: Tractor Pre-Operation Inspection/Service
Before each implement use, a complete inspection and service is required to ensure the implement is in a good and safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the implement is ready for operation, conduct the following. OPS-T-0002 RTXG SERIES TILLER 5/19 Operation Section 4-14 © 2020 Alamo Group Inc.
Page 47 Ensure the manual canister is secured to the equipment with the operator’s manual inside. • Ensure all safety signs are in place and legible. Replace missing, damaged, and illegible decals. OPS-U- 0011 RTXG SERIES TILLER 5/19 Operation Section 4-15 © 2020 Alamo Group Inc.
Page 48 The engine coolant fluid level is full The radiator is free of debris The air filter is in good condition Operator’s Signature:___________________________________________________ DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT RTXG SERIES TILLER 5/19 Operation Section 4-16 © 2020 Alamo Group Inc.
Page 49 Tiller tines are not chipped, cracked or bent Tiller tines are tight Rear deflector shield is in place and in good con- Operator’s Signature:_____________________________________________________ DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT RTXG SERIES TILLER 5/19 Operation Section 4-17 © 2020 Alamo Group Inc.
Page 50: Operating The Tractor And Implement
The seat belt is your best protection from falling off the tractor and the ROPS provides protection from being crushed during a tractor roll-over. OPS-T-0003 RTXG SERIES TILLER 5/19 Operation Section 4-18...
Page 51: Adjusting The Tiller For Work
The adjustment bolts for both right and left sides should be positioned in the same adjustment hole. This allows the tiller to till the same depth on each side. Adjust the tailgate, until the desired mulching effect is achieved. RTXG SERIES TILLER 5/19 Operation Section 4-19 © 2020 Alamo Group Inc.
Page 52: Bystanders/Passersby Precautions
PTO immediately. Inspect the implement to determine the cause of the noise or vibration and repair the abnormality. OPS-U- 0027 RTXG SERIES TILLER 5/19 Operation Section 4-20 © 2020 Alamo Group Inc.
Page 54: Disconnecting The Implement From The Tractor
Do not let the driveline fall into mud or dirt, which can contaminate the bearing and shorten the life of the driveline. RTXG SERIES TILLER 5/19 Operation Section 4-22...
Page 55: Implement Storage
To ensure safety while driving the tractor with an attached implement, review the following. OPS-U- 0012 RTXG SERIES TILLER 5/19 Operation Section 4-23 © 2020 Alamo Group Inc.
Page 56 The implement can then be raised to the maximum lift height. OPS-T-0011 RTXG SERIES TILLER 5/19 Operation Section 4-24 © 2020 Alamo Group Inc.
Page 57: Brake And Differential Lock Setting
PTO output shaft. Secure the driveline to the implement deck to prevent driveline damage or loss during transport. OPS-T- 0012 RTXG SERIES TILLER 5/19 Operation Section 4-25 © 2020 Alamo Group Inc.
Page 58: Transporting On Public Roadways
Consult an authorized tractor dealer for lighting kits and modifications available to upgrade the lighting on older tractor models. OPS-U- 0021 RTXG SERIES TILLER 5/19 Operation Section 4-26 © 2020 Alamo Group Inc.
Page 59: Hauling The Tractor And Implement
Ensure that the load will be in compliance with the legal limits set for the areas that will be traveled through. OPS-U- 0024 RTXG SERIES TILLER 5/19 Operation Section 4-27 © 2020 Alamo Group Inc.
Page 61: Troubleshooting Guide
Add oil Slip clutch slipping Reduce load to machine or adjust slip clutch Oil leaking from gearbox Damaged seals Replace seals Gearbox overfilled Drain to proper level (1/2 full) RTXG SERIES TILLER 5/19 Operation Section 4-29 © 2020 Alamo Group Inc.
Page 63: Maintenance Section
MAINTENANCE SECTION Maintenance Section 5-1...
Page 64: Lubrication Information
NOTE: Make sure the Gearbox is level prior to removing the Inspection Plug. Tilting forward may result in over filling. Tilting back may result in under filling. Use GL5-85W 140 or Triple Zero Grease which can be poured and has an “EP” Extreme Pressure Additive. RTXG SERIES TILLER 5/19 Maintenance Section 5-2 © 2020 Alamo Group Inc.
Page 65 2. Pour the gear oil into the vent plug hole slowly until the oil starts to come out of the small hole on the side. DO NOT OVERFILL THE GEARBOX! 3. Replace the small Inspection Plug and the Vent Plug. Clean up any excess gear oil. RTXG SERIES TILLER 5/19 Maintenance Section 5-3 © 2020 Alamo Group Inc.
Page 66: Driveshaft Lubrication
Safety Manual for more information on the safe use of a driveline during normal operation and maintenance. Or type in your internet browser the following web address: www.algqr.com/dme Ops-0009-MISC RTXG SERIES TILLER 5/19 Maintenance Section 5-4 © 2020 Alamo Group Inc.
Page 67: Slip Clutches
Clutch facings will soak up moisture and cause the metal plates to rust badly. When this occurs, the break-away torque increases greatly and damage to gearbox, driveline, or tractor PTO can occur. RTXG SERIES TILLER 5/19 Maintenance Section 5-5 © 2020 Alamo Group Inc.
Page 68: General Maintenance
They do not apply if special graphited or molydisulphide greases or other extreme pressure lubricants are used. This applies to both UNF fine and UNC coarse threads. RTXG SERIES TILLER 5/19 Maintenance Section 5-6 © 2020 Alamo Group Inc.
Page 71 TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety...
Page 72 RTX85G, RTX92G ROTARY TILLER RTXG Series Tiller -SOM - 5/19 P/N 50075826...

This manual is also suitable for:

Rtx85g Rtx92g

Bush Hog RTXG Series Operator's Manual

Safety Section

Introduction Section

Assembly Section

Operation Section

Maintenance Section

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Bush Hog RTXG Series

Summary of Contents for Bush Hog RTXG Series

This manual is also suitable for:

Table of Contents