Table of Contents
Advertisement
Reversible door
The door can be changed from right-hinged to left-hinged and vice versa as follows:
1. Lay the appliance on its back
and loosen the upper hinge.
4. You will need to remove the magnet on the underside of the door by unscrewing the two screws,
pulling the magnet away from the door. Also with a small Philips head screwdriver remove the Vintec
logo badge and swap the magnet where the badge was and vice versa.
5. Remove the top and bottom bushes on the door frame (the bushes are the black, round plastic
pieces which fit into the top and bottom hinges) and swap them så that the bush which was on top is
now on bottom and vice versa.
6. Carefully remove the covers
on the side of the plinth using
a flat-headed screwdriver.
12
2. Remove the upper hinge.
7. Pull up the hinge pin...
...and fit it on the opposite side.
3. Rotate the glass door 180°
(On the smaller cabinets
(1500mm) desmount the
handle. The screws are on
the inside of the sealing strip.
Move the handle 400mm up
and mount it again so it is in
the same height as before.)
8. Unscrew the lock pin using a
flat-headed screwdriver.
User Manual
Advertisement
Table of Contents
