Safety - Husqvarna K 770 Operator's Manual

Hide thumbs Also See for K 770:
Table of Contents

Advertisement

Available languages

Available languages

Rows 6–7: EU type approval or Chinese MEIN number
Euro V Emissions
WARNING: Tampering with the engine voids
the EU type-approval of this product.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
General safety instructions
WARNING: Read the warning instructions
that follow before you use the product.
A power cutter is a dangerous tool if used carelessly
or incorrectly and can cause serious injury or death.
It is very important that you read and understand the
contents of this operator's manual. It is also
recommended that first time operators also obtain
practical instruction before using the product.
Do not do modifications to this product. Modifications
that are not approved by the manufacturer, can
cause serious injury or death.
Do not operate the product if it is possible that other
persons have done modifications to the product.
Always use original accessories and spare parts.
Accessories and spare parts that are not approved
by the manufacturer, can cause serious injury or
death.
Keep the product clean. Make sure that you can
clearly read signs and decals.
Never allow children or other persons not trained in
the use of the product to use or service it.
6
the product is incorrectly repaired.
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.

Safety

Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
Only let approved persons operate the product.
This product produces an electromagnetic field
during operation. This field can under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
The information in this operator's manual is never a
substitute for professional skills and experience. If
you are in a situation where you feel unsafe, stop
and get expert advice. Speak to your servicing
dealer. Do not try any task that you feel unsure of.
Safety instructions for operation
WARNING: Read the warning instructions
that follow before you use the product.
Before you use a power cutter, you must understand
the effects of kickback and how to prevent them.
Kickback on page 16 .
Refer to
Do the safety checks, maintenance and servicing as
given in this operator's manual. Some maintenance
and servicing must be done by an approved service
center. Refer to
Do not use the product if it is defective.
Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine. These
conditions can have an unwanted effect on your
vision, alertness, coordination or judgment.
Do not start the product without the belt and the belt
guard installed. The clutch can become loose and
cause injury.
Sparks from the cutting blade can cause fire in
flammable materials such as gasoline, gas, wood,
clothes and dry grass.
Do not cut asbestos material.
Introduction on page 24 .
1447 - 001 - 16.04.2020

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K 770 oilguardK 770 rescueK 770 smartguard

Table of Contents