Manual Ch Preset - JVC AV-2112Y1 Instructions Manual

Using the TV'S menus

MANUAL CH PRESET

You can manually preset desired TV
channels to desired channels.
1 Press MENU T to display the
"MENU 3" menu, then select
"MANUAL CH PRESET".
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
LANGUAGE
SELECT BY
OPERATE BY -+
2 Press CHANNEL M or MENU
The sub-menu is displayed.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
SELECT BY
PROGRAM BY -+
SEARCH BY VOL-+
• The channel number is displayed as a PR
number. For example, channel 1 will be
displayed as PR 1. However, the AV
channel will be displayed as AV.
3 Press CHANNEL M or MENU
to select a channel number.
4 Press VOLUME M to start
searching for the TV channel.
"> > >" or "< < <" is displayed on the
screen.
When the TV finds a TV channel, the
"> > >" or "< < <" display goes out,
and the TV channel is preset to the
currently selected channel number.
• If the TV channel you want to preset is
not displayed, repeat step 4 until the TV
finds the TV channel you want to preset.
• To stop the MANUAL CH PRESET
function, press any button other than the
VOLUME –/+ button.
16
3
ENGLISH
EXIT BY
D I SPLA Y
NO
B/G
PR 1 VL
EXIT BY
D I SPLA Y
If the picture is not clear:
Fine-tune the TV channel.
1 Press menu t to select "FINE".
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
SELECT BY
PROGRAM BY -+
FINE
2 Hold VOLUME –/+ down to fine-tune
the TV channel so that the best
image is displayed on screen.
">" or "<" indicates that the TV is
/ .
fine-tuning the TV channel.
If the sound is not clear:
1 Press menu t to select
"SOUND SYSTEM".
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
SELECT BY
PROGRAM BY -+
CHANGE BY VOL-+
/
2 Press VOLUME –/+ to select the
appropriate sound system.
• For the sound system in each
country or region, refer to the table
"Broadcasting systems" on page 21.
5 Press MENU T to select
"MANUAL".
6 Repeat steps 3 to 5 if you want to
preset another TV channel to a
channel.
NO
B/G
PR 3 VL
EXIT BY
BY VOL-+ D I SPLA Y
NO
B/G
PR 3 VL
EXIT BY
D I SPLA Y