Page 1
This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 4-6 for your safety. Please keep this manual in an easily accessible place and refer to it anytime. VK7920NHTY www.lg.com...
Do not use the vacuum cleaner if the power cord or plug is damaged or faulty. Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory or...
Page 5
Do not use vacuum cleaner if it has been under water. Personal injury or product damage could result. Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid Keep children away and beware of obstructions hazard.
Page 6
If the power cord is damaged, it must be replaced by Failure to do so could result in personal injury or product an approved LG Electronics Service Agent to avoid a damage. hazard. Use accessory nozzles in sofa mode.
How to use Assembling vacuum cleaner Hose handle Spring latch Telescopic pipe (depending on model) (depending on model) Carpet and floor nozzle(depending on model) Telescopic pipe Push the nozzle into the telescopic pipe. Push telescopic pipe firmly into hose handle. Grasp the spring latch to expand.
Page 11
Click! Button Fitting pipe Flexible hose Attachment point Connecting the hose to the vacuum cleaner Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner,press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner.
How to use Operating vacuum cleaner Plug Cord reel button Control knob POWER CONTROL FLOOR CARPET SOFA CURTAIN How to operate Alarm sound Park mode Storage เสี ย งเตื อ น Pull out the power cord to the desired To store during vacuuming, for When you have switched off Alarm will sound when the dust tank length and plug into the socket.
How to use Using accessory nozzles Upholstery nozzle Dusting brush Crevice tool Upholstery nozzle Dusting brush Crevice tool Upholstery nozzle is for vacuuming Dusting brush is for vacuuming picture Crevice tool is for vacuuming in those upholstery, mattresses, etc. frames, furniture frames, books normally hard-to-reach places such as and other irregular surfaces.
How to use Using the sani punch nozzle การใช้ ง านหั ว ดู ด ไรฝุ ่ น สำหรั บ ที ่ น อน และโซฟา Sani Punch Features How to use This nozzle picks up even dust inside through beating. Follow the directions below for proper use. The bottom part can be separated to be cleaned.
Page 16
This sani punch nozzle is for effective cleaning of beds and blankets to remove mites and dust. หั ว ดู ด Sani Punch Effective cleaning Bed & blanket Bulky & heavy blanket Light blanket & sheet When using on the bed When using on the floor Lay out the blanket It is easier to clean a light blanket or sheet...
Page 17
For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool to vacuum dust. Since the vibrator inside is composed of precision parts, never disassemble the body. Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle. Since removal of the punch bar may cause performance problems, do not warp or remove it.
Page 18
Follow the instruction below for through washing. (Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction) Bottom plate Punch bar Bottom plate Punch bar Press the button on the Wipe all the soiled parts Wash the removed bot-tom rear side of the vacuum of the vacuum nozzle...
Page 19
Projection Push the button 2-3 times When the dust is fully when the dust is filled in filled after cleaning, the dustbin while cleaning take the bin and turn it counterclockwise to disconnect Take the bin to fix into Waste the dust in the projection part and the bin then turn it clockwise to...
How to use Emptying dust tank Tank separation lever Pull out Tank handle Dust tank cap The dust tank needs emptying when indicator light is on. NOTICE, Turn off the vacuum cleaner and unplug it. If suction power decreases after empting dust tank, Grasp the handle of the tank and then press the tank separation lever.
How to use Cleaning dust tank Tank separation lever Pull out Tank handle NOTICE Press tank separation button and pull out dust tank. Raise dust tank cap If suction power decreases after cleaning dust tank,clean air filter Dry fully in shade so that moisture is entirely removed. and motor safety filter.
How to use Cleaning air filter and motor safety filter rator Pre-filter cover over Air filter Motor safety filter If suction power is decreased after cleaning dust tank or indicator light is on, clean air filter and motor safety filter. Air filter and motor safety filter are located at the up of vacuum cleaner in the above figure.
How to use Cleaning exhaust filter Exhaust filter cover Exhaust filter Button Lever Exhaust filter cover The exhaust filter is a reuseable. To clean the exhaust filter, remove the Exhaust filter cover on the body by pulling out it. Separate the exhaust filter. Dust off filter.(Do not wash filter with water.) The exhaust filter should be cleaned at least a year.
What to do if your vacuum cleaner does not work Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working. What to do when suction performance decreases • Turn off the vacuum cleaner and unplug it. •...
Need help?
Do you have a question about the VK7920NHTY and is the answer not in the manual?
Questions and answers