Advertisement
Table of Contents
ITEM NO.:
1. Thread the LOOP (A) onto the NIPPLE (B). Until tighten!
2. Unfold the arms to the correct place to match the FRAME (I).
3. Thread the NIPPLE (H) onto COUPLEN (G). Until tighten!
4. Place the FRAME (I) onto the fixture careful. Make sure all of the NIPPLE (H)
hade insert the tubings on the FRAME (I).
5. Place the COVER (J) onto the FRAME (I). Then secured by the BALL NUT (K).
6. Measure the height from hanging fixture to your ceiling. Cut the excess chain
and wire to fit the height.
7. Follow the wattage label on the glass hold and install correct wattage and type
bulb (no provide) onto the socket.
8. For mounting and wiring step please follow the mounting instruction sheet
enclosed.
Assembly Instructions
31633
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Triarch Indoor Lighting 31633
Summary of Contents for Triarch Indoor Lighting 31633
- Page 1 ITEM NO.: 31633 1. Thread the LOOP (A) onto the NIPPLE (B). Until tighten! 2. Unfold the arms to the correct place to match the FRAME (I). 3. Thread the NIPPLE (H) onto COUPLEN (G). Until tighten! 4. Place the FRAME (I) onto the fixture careful. Make sure all of the NIPPLE (H) hade insert the tubings on the FRAME (I).
- Page 2 Assembly Instructions ITEM NO.: 31633/31634 PICTURE 1 PICTURE 4 STEP-BY-STEP ASSEMBLY GUIDE 1. CAREFULLY REMOVE FIXTURE OUT OF THE BOX.(PICTURE 1) 2. THREAD THE LOOP ONTO THE NIPPLE ON THE FIXTURE. . PUT THE BOTTOM FRAME ON TOP OF A PIECE OF CLOTH OR CARPET AND AVOID ANY SCRATCHES ON THE FIXTURE 4.
Need help?
Do you have a question about the Indoor Lighting 31633 and is the answer not in the manual?
Questions and answers