*Getting to know your
appliance
T he instruction manual is the same for various different
G e t t i n g t o k n o w y o u r a p p l i a n c e
hobs. You can find the hob dimensions in the overview
of models. ~ Page 2
The control panel
Display
Heat settings
‚
-
Š
Residual heat
•
/
œ
PowerBoost function
›
Keep warm function
–
Timer
‰‰
Controls
Main switch
#
b
PowerBoost function
Hotplate selection
¢
Childproof lock
$
Wipe protection
0IIIIIIIIIIIII
Control panel*
Activating the dual-circuit hotplate
ð
Activating the small cooking zone
ˆ
Activating the extended cooking zone
Ô
Keep-warm function
è
Timer
0
Stopwatch function
‰
*The middle hotplate is adjusted on the right-hand control panel
Notes
Depending on the operating condition of the hob the
■
controls which can currently be selected light up
brightly or dimmed. If you touch them, the relevant
function is activated.
The controls which cannot currently be selected do
■
not light up.
Getting to know your appliance
The settings of the hotplates currently selected light
■
up brightly.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Do not pull pans close to the displays and sensors.
■
The electronics could overheat.
The hotplates
Hotplate
Single-circuit hot-
$
plate
Dual-circuit hotplate
ð
When the hotplate is activated: the corresponding indicator lights up
Notes
Any dark areas in the glow pattern of the hotplate
■
are due to technical reasons. The function of the
hotplate is not affected.
Hotplate temperature is regulated by the heat
■
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
– sensitive components are protected from
overheating
– the appliance is protected from electrical
overload
– better cooking results are achieved
With multi-circuit hotplates the heater elements of the
■
inner filament circuits and the heater element of the
activations may switch on and off at different times.
Activating and deactivating
Touch the
ð
symbol
en
5