General Power Tool Safety Warnings - Bosch GCM18V-08 Operating/Safety Instructions Manual

2610051914.qxp_GCM18V-08 6/24/19 1:56 PM Page 4

General power tool safety warnings

▶ Work area safety
Keep work area clean and well lit.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Keep children and bystanders away while
operating a power tool.
▶ Electrical safety
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
Do not expose power tools to rain or wet
conditions.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
If operating a power tool in a damp location is
unavoidable, use
Interrupter (GFCI) protected supply.
▶ Personal safety
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
Use personal protective equipment. Always wear
eye protection.
Read all safety warnings, instructions, illustrations and specifications provided with this
power tool.
Save all warnings and instructions for future reference.
a Ground Fault Circuit
SAVE THESE INSTRUCTIONS
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and / or battery pack, picking up or
carrying the tool.
Remove any adjusting key or wrench before
turning the power tool on.
Do not overreach. Keep proper footing and
balance at all times.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts.
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Do not let familiarity gained from frequent use of
tools allow you to become complacent and
ignore tool safety principles.
▶ Power tool use and care
Do not force the power tool. Use the correct
power tool for your application.
Do not use the power tool if the switch does not
turn it on and off.
Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any
adjustments, changing accessories, or storing
power tools.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
4