1. Manuals
  2. Brands
  3. Triarch Manuals
  4. Indoor Furnishing
  5. 31741/16
  6. Assembly instructions

Triarch 31741/16 Assembly Instructions

Triarch international indoor lighting assembly instructions
Hide thumbs
1
2

Advertisement

Table of Contents

FOR CHAIN-HUNG MOUNTING: (REFER TO FIG.1)
1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration.
2. Unravel the supply power and ground wires and pass the holes of fixture loop. Thread the fixture
loop onto the coupling at the top of fixture body. Hand tightens until snug.
3. Thread the top of stem into the coupling at the underside of fixture body. Hand tightens until snug.
4. Install proper bulbs (not provided) to the sockets referring to the markings and labels on fixture for
maximum wattage.
5. Locate the tube, cap A, check ring, glass, rubber washer and steel washer. Carefully pass the
center holes of tube, cap, glass, rubber washer and steel washer through the stem and secure
with hex nut.
6. Install cap B through the protruding stem and secure with finial.
7. Restore power to the installation point ON. Retain this sheet for future reference.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
ASSEMBLY INSTRUCTIONS FOR 31741-16
FIG. 1
Fixture body
Stem
Tube
Cap A
Check ring
Fixture loop
Glass
Rubber washer
Steel washer
Hex nut
Cap B
Finial
Page 1 of 2
01.06

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 31741/16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Triarch 31741/16

Summary of Contents for Triarch 31741/16

  • Page 1 ASSEMBLY INSTRUCTIONS FOR 31741-16 FOR CHAIN-HUNG MOUNTING: (REFER TO FIG.1) 1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration. 2. Unravel the supply power and ground wires and pass the holes of fixture loop. Thread the fixture loop onto the coupling at the top of fixture body.
  • Page 2 ASSEMBLY INSTRUCTIONS FOR 31741-16 FOR CEILING MOUNTING: (REFER TO FIG.2) With power to the installation point OFF, attach the crossbar with (2) mounting screws to ceiling mounted outlet box with (2) outlet box screws. Unravel the fixture supply and ground wires using wire cutters, trim the fixture supply and ground wires to approx.

Table of Contents