Advertisement
Mounting the bags
Once all 4 bolts have been tightened, you can mount the bags. With the handle pulled up, slide the bags on
to the docking points, making sure the bracket sits in the grooves on the docking points (refer to pictures
below). Push down the lever on the bag and you should feel it snap into place with about 20 pounds of
force. If it is too difficult or too easy to push the handle down, the brackets may require adjustment (see
next section). To remove the bags, lift up on the handle while holding up the spring loaded latch. The lock
on the inside of the bag lets you lock the bags to the bike for theft prevention.
INCORRECT Brackets are not on the docking points and will
CORRECT The brackets are sitting in the groove on the docking
not clamp on in this position
point and are able to clamp on securely.
Adjusting the brackets
The brackets will require adjustment when they come from the factory. T he brackets will also require
periodic adjustment for the life of the bags as they break in . Before adjusting the bracket there are 2
features that you need to identify. One is the Adjuster, which is the part with the 2 stickers on it marked T
and L. The nut in the middle of this piece is how the brackets are adjusted. You will also notice a square
hole in the plate under the adjuster. In order to adjust the bags, you must move the handle so that the nut in
the adjuster sits over the square hole in the backing plate (This will be about halfway between open and
closed). This allows the square nut to be turned, adjusting the clamping pressure. Follow the markings on
the bag, T to tighten and L to loosen. It should take 20 Lbs of force to clamp the bags in place.
Care Instructions
For any fabric components of the bags, we recommend applying a UV blocker in order to protect the fabric
of the bags from fading. We suggest using 303 Aerospace Protectant. If your bike is kept outdoors in
intense sunlight, we recommend applying about once a month. Bags have not been treated before leaving
the factory.
For leather surfaces of the bag, we recommend applying a black shoe cream to restore color and luster once
the bags are worn. Any brand will do, Meltonian is readily available in many stores. Leather does not need
to be treated on a regular schedule, simply rub on a thin layer when you notice the leather is starting to look
worn. Applying too often can lead to unsightly build up and cracking.
Advertisement
