Triarch 29229 Assembly Instructions

1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration.
2. Unravel the supply power and ground wires and pass through the center hole of fixture loop.
3. Carefully place cap over protruding nipple, and secure with the fixture loop (Note: Attach the lead
wire to fixture loop with bare copper thread in the packet).
4. Install a proper bulb (not provided) to the socket referring to the markings and labels on fixture for
maximum wattage.
5. Restore power to the installation point ON. Retain this sheet for future reference.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
ASSEMBLY INSTRUCTIONS FOR 29229
Fixture loop
Cap
Frame
01.27