Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for StarLeaf Group Telepresence Mini 3330
Summary of Contents for StarLeaf Group Telepresence Mini 3330
- Page 1 StarLeaf GT Mini 3330 Installation Guide 04 May 2020...
-
Page 2: Table Of Contents
Max send and receive rates Typical installation of GT Mini Using the Conference Phone 2220 LED behavior Installing the Conference Phone 2220 Installing the Conference Phone 2220 Using Group Telepresence StarLeaf installation guide, 04 May 2020 Page 2 of 35... - Page 3 About StarLeaf touchscreen controllers Touchscreen controller features Appendix: LED behavior Network port LED behavior StarLeaf Controller Port LED behavior Legal information Third party software acknowledgments Disclaimers and notices StarLeaf installation guide, 04 May 2020 Page 3 of 35...
-
Page 4: About The Codec
This port is for a 4P4C connector providing an RS-232 interface. This is the same connector used in RJ9, RJ10, and RJ22. There is both a serial and an IP API option for the GT Mini and a StarLeaf Room Systems API guide is available... -
Page 5: Using The Correct Hdmi And Dvi Cables
For short cable lengths of up to 5m (17 feet), use 28AWG or thicker core. For longer lengths, use 24AWG or thicker. StarLeaf does not support the use of HDMI or DVI cables of longer than 15m (49 feet) with the codec. -
Page 6: Starleaf Pronto
About the codec StarLeaf Pronto StarLeaf Pronto allows users to meet and share in an instant. When you connect Pronto to your laptop, your screen and audio are shared with the room so that you are ready to present immediately. Your StarLeaf meetings are also synchronized with the room allowing you to join with one touch. -
Page 7: 3.5Mm Audio Connector Pinout
Ground = back Extending the camera cables StarLeaf room systems that use a PTZ camera are provided with camera connection cables of 5m in length. If you need to install the camera further than 5m from the room system, you must extend those cables. -
Page 8: Gt Mini Dimensions And Mounting
GT Mini dimensions and mounting GT Mini dimensions and mounting StarLeaf installation guide, 04 May 2020 Page 8 of 35... -
Page 9: About The Touchscreen Controller
About the touchscreen controller About the touchscreen controller Every room system comes with a touchscreen controller: the StarLeaf Touch. The touchscreen allows you to make and control video calls in the room system. Depending on your organization, you may have the... - Page 10 About the touchscreen controller Touch 2035/2036 Touch 2045 Touch 2035/2036 Dimensions Touch 2045 Dimensions StarLeaf installation guide, 04 May 2020 Page 10 of 35...
- Page 11 About the touchscreen controller StarLeaf installation guide, 04 May 2020 Page 11 of 35...
-
Page 12: How To Install Gt Mini 3330
(p8). Connecting cables to the codec 1. Using an Ethernet cable, connect the StarLeaf Controller port on the codec to the network port (PoE) on the rear of the touchscreen controller. The network port on the touchscreen controller is marked with this symbol:... - Page 13 How to install GT Mini 3330 Note: The touchscreen controller must connect directly to the codec; do not connect the touchscreen controller via a switch to the codec. Note: If you are using the StarLeaf Conference Phone 2220, refer to Installing the Conference Phone 2220 (p27).
- Page 14 Connecting to the StarLeaf platform Provisioning the room system through the Portal Either you or your reseller can register the room system using the StarLeaf Portal. To do this: 1. In the StarLeaf Portal, choose Room systems > Add room system.
- Page 15 QuickConnect The touchscreen controller receives power from the Group Telepresence System. The first time it starts up it displays the screen shown below. Enter your StarLeaf QuickConnect code. StarLeaf installation guide, 04 May 2020 Page 15 of 35...
- Page 16 How to install GT Mini 3330 The touchscreen controller displays the meeting room name and extension number as per your StarLeaf account. This is the home screen of the touchscreen controller. The Group Telepresence System is ready to make and receive calls. An example home...
-
Page 17: Starleaf Pronto
You can connect your laptop, in order to share content, in one of two ways: StarLeaf Pronto StarLeaf Pronto allows users to meet and share in an instant. When you connect Pronto to your laptop, your screen and audio are shared with the room so that you are ready to present immediately. -
Page 18: About The Camera
Select the position you require from the touchscreen controller. Camera presets Camera presets allow you to save up to five pre-defined camera positions. Users can then select these positions from the touchscreen controller. To create camera presets: StarLeaf installation guide, 04 May 2020 Page 18 of 35... - Page 19 Camera presets, enter a name for the preset and select Save. To try out presets without saving them, click Test next to a preset. To delete a preset, select Clear. StarLeaf installation guide, 04 May 2020 Page 19 of 35...
- Page 20 About the camera StarLeaf installation guide, 04 May 2020 Page 20 of 35...
-
Page 21: Audio Settings For Group Telepresence
StarLeaf GT Mini 3330 and Group Telepresence 3351 both offer phantom power through each of its XLR connectors for use by active microphones, such as the StarLeaf Microphone. The phantom power supply can be enabled or disabled here. It is compatible with active microphones, which are designed for 48V phantom power. -
Page 22: Line In Microphones
When the Group Telepresence system is installed, use the touchscreen controller to play the noise: 1. Double-tap the home button on the Touch. 2. Go to sound. 3. Select pink noise test. The pink noise begins to play. StarLeaf installation guide, 04 May 2020 Page 22 of 35... - Page 23 Portal, or the gain settings of external equipment, can be adjusted to calibrate the SPL of the test tone. When you play the pink noise, the volume resets to default. StarLeaf installation guide, 04 May 2020 Page 23 of 35...
-
Page 24: Advanced Settings
API mode If you have purchased the Endpoint Control API option from StarLeaf, you can enable the API on each room system. You need to select whether you use the API over the serial connection or instead use an IP connection. -
Page 25: Typical Installation Of Gt Mini
Typical installation of GT Mini This diagram shows a typical installation of a GT Mini. StarLeaf Group Telepresence Installation Guide Page 25 of 35... -
Page 26: Using The Conference Phone 2220
If you are using the Conference Phone 2220, the installation procedure for the Group Telepresence system is slightly different. The diagram below shows how to connect the StarLeaf Touch to the Conference Phone and into the StarLeaf Controller connector on the rear of the Group Telepresence system. -
Page 27: Installing The Conference Phone 2220
Installing the Conference Phone 2220 StarLeaf Group Telepresence Installation Guide Page 27 of 35... -
Page 28: Using Group Telepresence
Information about using Group Telepresence is in the Knowledge Center. If you have any problems with Group Telepresence, for example if there are audio or video issues, contact StarLeaf technical support for guidance. To do so, go to the Knowledge Center. StarLeaf installation guide, 04 May 2020... - Page 29 About StarLeaf touchscreen controllers About StarLeaf touchscreen controllers Every StarLeaf hardware endpoint is provided with a touchscreen controller. You use the touchscreen controller as the means for making and controlling video calls. Through the touchscreen controller, you can access the directory and contacts. You can use the touchscreen controller to create ad hoc conferences, and to add and remove participants.
- Page 30 The StarLeaf Touch 2035 The figure below shows the features on the StarLeaf Touch 2035. The StarLeaf Phone 2120 The figure below shows the features on the front of the StarLeaf Phone 2120. StarLeaf installation guide, 04 May 2020 Page 30 of 35...
- Page 31 Video call using StarLeaf Personal Telepresence 3050: If you have a StarLeaf Personal Telepresence 3050 system, press to listen through the loudspeakers of the monitor and also to use the microphone inside the StarLeaf Monitor.
- Page 32 Touch 2035 only. Press to end the current call Answer/Make Touch 2035 only. Press to answer an incoming call. At other times, press to access the dial screen and the directory call StarLeaf installation guide, 04 May 2020 Page 32 of 35...
- Page 33 About StarLeaf touchscreen controllers StarLeaf installation guide, 04 May 2020 Page 33 of 35...
- Page 34 Gigabit LED (Green) On for 1000 Mbit/s link, off for 10/100 Mbit/s link or (On the right when looking at the no link port) StarLeaf installation guide, 04 May 2020 Page 34 of 35...
- Page 35 StarLeaf Limited. StarLeaf Limited reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of StarLeaf Limited to provide notification of such revision or change. StarLeaf Limited provides this documentation without warranty, term, or condition of any...
Need help?
Do you have a question about the Group Telepresence Mini 3330 and is the answer not in the manual?
Questions and answers