LG TD-H803CSW Owner's Manual page 37

Table of Contents

Advertisement

Symptoms
Clothes take too long
to dry.
Drying time is not
consistent.
Clothes are wrinkled.
Load is not properly sorted.
• Separate heavy items from lightweight items. Larger and heavier items
take longer to dry. Light items in a load with heavy items can fool the
sensor because the light items dry faster.
Large load of heavy fabrics.
• Heavy fabrics take longer to dry because they tend to retain more
moisture. To help reduce and maintain more consistent drying times for
large and heavy fabrics, separate these items into smaller loads of a
consistent size.
Appliance controls are not set properly.
• Use the appropriate control settings for the type of load you are drying.
Some loads may require an adjustment of the dry level setting for proper
drying.
Lint filter needs to be cleaned.
• Remove the lint from the lint filter after every cycle. With the lint removed,
hold the lint filter up to a light to see if it is dirty or clogged. With some
loads that produce high amounts of lint, such as new bath towels, it may
be necessary to pause the cycle and clean the filter during the cycle.
House fuse is blown, circuit breaker has tripped, or power outage has
occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the
problem is a circuit overload, have it corrected by a qualified electrician.
Appliance is overloaded.
• Divide extra large loads into smaller loads for better drying performance
and efficiency.
Appliance is underloaded.
• If you are drying a very small load, add a few extra items to ensure proper
tumbling action. If the load is very small and you are using Sensor Dry
programmes, the electronic control cannot properly sense the dryness of
the load and may shut off too soon. Use Manual Drying programmes or
add some extra wet clothes to the load.
Heat settings, load size, or dampness of clothing is not consistent.
• The drying time for a load will vary depending on the type of heat used
(electric), the size of the load, the type of fabrics, the wetness of the
clothes, and lint filter. Even an unbalanced load in the appliance can cause
poor spinning, resulting in wetter clothes which will take longer to dry.
Clothes have dried too long (overdried).
• Over drying a load of clothes can lead to wrinkled clothes. Try a shorter
drying time.
Clothes have been left in the appliance for too long after cycle ends.
• Use the Anti Crease option.
TROUBLESHOOTING
Possible Cause & Solution
37
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Td-h903cmeTd-h903cmwTd-h903cmbDvh4-08w

Table of Contents