Operating The Appliance; Loading Laundry And Switching On The Dryer; Setting A Program; Starting The Program - Bosch WTG86401TC Installation And Operating Instructions Manual

Operating the appliance

en
1
Operating the
appliance
Loading laundry and
O p e r a t i n g t h e a p p l i a n c e
switching on the dryer
The dryer must be correctly
Note:
positioned and connected, ~ Page 27.
Place the laundry in the drum.
1.
To switch the dryer on, turn the
2.
program selector to any program.
Close the dryer door.
3.
Caution!
Risk of material damage to the dryer or
laundry.
Do not trap any laundry between the
dryer door and the door seal.

Setting a program

If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a program, see
~ Page 14.
Select the required program;
1.
detailed information on the programs
can be found from ~ Page 12
onwards.
16
Use the program selector to set the
2.
required program. The default
program settings for the selected
program appear in the display panel.
Default program settings are
Note:
standard settings that are already
defined when a program is selected.
After selecting a program, you can
see the default program settings in
the display panel.
If required, adjust the default
3.
program settings. You can find
detailed information on this from
~ Page 12 onwards.

Starting the program

Press the Start button.
If you want to lock the program
Note:
to prevent it from being inadvertently
adjusted, you can select the childproof
lock, see ~ Page 14.

Program sequence

The program status is displayed in the
display field.
Changing the program or
adding laundry
You can remove or add laundry and
change or alter the program at any time
during drying.
To pause the program, open the
1.
dryer door or press the Start button.
Add or remove laundry.
2.
Select another program or an
3.
additional function, if required.
Close the dryer door.
4.