Table of Contents English ... 1. Before You Start 2. How to Install ... 3. Configure the Print Server ... 4. Printing ... 5. Faxing ... 6. Scanning ... Troubleshooting ... Version 11.16.07...
1. Before You Start System Requirements CD-ROM Drive CPU: 300Mhz or above/ 800Mhz or above (Windows Vista) Memory: 256MB RAM or above/ 512MB RAM or above (Window Vista) Windows 2000/XP/2003 Server/Vista (32bit) Note: 1. Do not perform the following unless instructed to do so: 1.
2. How to install 1. Install the printer drivers to your computer. Then shutdown the printer and disconnect the printer from your computer. Note: Please refer to your printer's manual for printer installation instructions. 2. Connect the Power Adapter to the Print Server and then to a power outlet.
3. Configure the Print Server 1. Insert the Utility CD-ROM into your CD-ROM driver. Then click Setup Wizard. 2. Click Skip. 3. Select the print server and then click Next. English...
Page 6
4. Choose a wireless network to connect to and then click Next. 5. Configure the IP address of the print server to be in the same subnet as your network and then click Next. 6. Click Finish. English...
Page 7
7. Click Yes. 8. Follow the InstallShield Wizard instructions and then click Finish. 9. Click on Resource and then click Connect. 10. The printer driver wizard appears. Follow the printer driver wizard to install the printer. English...
Page 8
User's Guide on the Utility CD-ROM or TRENDnet's website at www.trendnet.com Register Your Product To ensure the highest level of customer service and support, please take a moment to www.TRENDnet.com/register register your product Online at: Thank you for choosing TRENDnet English...
4. Printing Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer.
5. Faxing Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer.
6. Scanning Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer.
If you still encounter problems or have any questions regarding the TEW-MP1U, please refer to the User's Guide included on the Utility CD-ROM or contact TRENDnet's Technical Support Department.
Page 13
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Need help?
Do you have a question about the TEW TEW-MP1U and is the answer not in the manual?
Questions and answers