Advertisement
Table of Contents
1
2
3
4
5
Test
1-38,55
40
43,50,54
44,45
48
49
53
1
2
3
4
POSEIDON MKVI
CHECK LIST
Start up Procedure
Cylinders OFF, CLOSE OPV,
OPEN-CIRCUIT mode.
Touch wet-switch, keep dry
for 5 seconds, then HOLD
wet-switch.
Test 44,45: turn cylinders ON.
Test 50: CLOSED-CIRCUIT.
Test 54: OPEN-CIRCUIT,
test bailout regulator function.
Confirm and Restart
Needs Servicing (if persistent
Use correct battery
Verify mouthpiece position
Turn cylinders on / Refill cylinders
Recharge Battery / Replace battery
Counterlungs half-full or less
Verify Oxygen Sensors
Post-Dive Checklist
Mouthpiece in OPEN-CIRCUIT.
Both cylinders OFF.
Wet-switch DRY.
Purge ADV.
Advertisement
Table of Contents
Related Manuals for POSEIDON MKVI
Summary of Contents for POSEIDON MKVI
- Page 1 Use correct battery 43,50,54 Verify mouthpiece position 44,45 Turn cylinders on / Refill cylinders Recharge Battery / Replace battery Counterlungs half-full or less Verify Oxygen Sensors Post-Dive Checklist Mouthpiece in OPEN-CIRCUIT. Both cylinders OFF. Wet-switch DRY. Purge ADV. POSEIDON MKVI CHECK LIST...
- Page 2 POSEIDON MKVI PRE-DIVE CHECKLIST Check for damage, dirt and deteriorations during assembly. Check that the battery is charged. Inspect electronics module, handset, cables, electric connections, HUD, pneumatics hoses and oxygen sensors. Mount top plate on top of scrub- ber, check O-rings (2 O-rings).
Need help?
Do you have a question about the MKVI and is the answer not in the manual?
Questions and answers