Safety Precautions; Backing Up Data; Caution: Risk Of Deafness; Reminders - Transcend MP840 User Manual

These usage and safety guidelines are IMPORTANT! Please follow them carefully.
Your MP840 is connected to a computer using a Mini USB to USB A-Type cable. Please
ensure that you connect the cable ends to the ports correctly.
General Use
Carefully unpack the contents of the MP840 package.
Do not allow your MP840 to become damp or wet from water or any other liquids.
Do not use a damp/wet cloth to wipe or clean the exterior case.
Do not use or store your MP840 in any of the listed environments:
o Direct sunlight
o Next to an air conditioner, electric heater or other heat sources
o In a closed car that is in direct sunlight

Backing Up Data

Transcend does NOT take any responsibility for data loss, or damage during operation. If you
decide to store data on your MP840 we strongly advise that you regularly backup the data to a
computer, or other storage medium.
To ensure Hi-Speed USB 2.0 data transfer rates when using the MP840, please check the computer
has the relevant USB drivers installed. If you are unsure on how to check this, please consult the
computer, or motherboard User's Manual for USB driver information.

Caution: Risk of Deafness

1. Repeated or regular use of headphones or earphones at volume levels above 80 decibels can give a
false impression that the audio level is not high enough. Users may try to progressively increase the
volume control therefore risking a dangerous noise level for their ears.
2. To protect your health and your hearing, keep the volume of your MP3 player below 80 decibels and
do not use for an extended period of time. Stop use if symptoms like headaches, nausea, or hearing
disorders occur.
3. Your MP3 player is limited to a volume level of 100 decibels.
4. Both the MP3 player and its accompanying earphones are compliant with the French regulation
concerning musical Walkmans (24
5. Before using other earphones, confirm that their technical specifications are compatible with the
original set.

Reminders

1. Make sure the LOCK switch is set to "OFF" before trying to Power ON the unit.
2. Never use the "Quick Format," or "Full Format" in Windows
3. Follow the procedures in the
a computer.
4. We suggest you update your device's firmware before starting to use it for the first time.

Safety Precautions

th
July 1998 Order).
"Disconnecting from a
®
to format your MP840.
Computer" section to remove your MP840 from