Configuring The Archiving Device - HP XW9400 Hardware Setup Manual

Fibre channel devices that use standard UNIX tape device calls.
The fibre channel devices that may be used are the ones for which the vendor
confirms the following:
The device driver is compliant with standard UNIX tape device calls.
The device is certified for use with the specific versions of your operating
system and kernel, Red Hat Enterprise Linux Workstation 4.0, Update 3.
While Autodesk Media & Entertainment makes no certification statement
about any device, the following SCSI devices have been tested and found to
be reliable when connected using an ATTO Fibre Channel to SCSI Bridge 2390:
Quantum LT03
Quantum DLT8000
Quantum DLT7000
Sony
Sony AIT2

Configuring the Archiving Device

The software initialization file (init.cfg) for your Visual Effects and Finishing
application contains examples of the use of the ClipMgtDevice Tape keywords.
Use them to select a block size value for your tape device, as well as to select
a text label that identifies the device in the Archiving module. Refer to the
Autodesk Visual Effects and Finishing Configuration File Reference Guide for
additional information.
You should also refer to the documentation from your archiving device vendor
for guidelines on the actual block size to use.
™
AIT3 SDX-D700C
Configuring the Archiving Device | 25