Completing The Parts Replacement - Lenovo ideacentre A340 Hardware Maintenance Manual

Figure 41. Removing the mount bracket
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 48.

Completing the parts replacement

To reinstall the computer covers and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See Chapter 6 "Hardware locations" on page 17 for the locations of various
components in your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.
3. Reinstall the front bezel.
4. Reinstall the side cover.
5. If a locking device is available, use it to lock the computer.
6. Reconnect the external cables and power cords to the corresponding connectors on the computer.
7. Depending on the parts you installed or replaced, you might need to confirm the updated information.
See Chapter 4 "Using the Setup Utility program" on page 11.
8. If a newly installed hardware component does not work normally, update the device driver.
48
ideacentre A340 Hardware Maintenance Manual